TORK CRAFT

Socket Adaptor - Carded Length: 65mm Square Drive: 3/8' male Shank: SDS Plus This product is a versatile socket adaptor that allows you to use 3/8' square drive sockets with a drill that has an SDS Plus chuck. It's designed for convenience, converting your rotary hammer drill into a powerful socket driver. The adaptor features a 3/8' male square drive on one end to securely hold sockets, and a 65mm SDS Plus shank on the other for a snug, non-slip fit in your drill. ..

Socket adaptor For socket: 3/8' Length: 50mm Shank: 1/4' Hex Packaging: Carded 1 Application: The square adaptor features a hex insert and a ball-detent end that can be used with sockets. The adaptor can be used with: Both an electric drill or a cordless drill. A ratcheting screwdriver to be used as a ratcheting nutdriver. IMPORTANT: Use a drill/driver with a safety clutch to prevent injury.....

Sanding belt cleaner Removes gum build up on abrasives. Application: The sanding belt cleaner instantly cleans sanding belts of all grits and removes the accumulated particles that lodge between the abrasive grains and cause a dull cut. Increase the life of your sanding belts and discs up to 500% with this sanding belt cleaner!....

Universal Socket Adaptor - Carded Length: 100mm Square Drive: 1/4' male Hex Drive: 1/4' male This product is a versatile universal socket adapter designed for convenience and adaptability. It features a dual-ended design, with a 1/4' square male drive on one side and a 1/4' hex male drive on the other, allowing it to connect to a wide range of tools. The adapter measures 100mm in length, providing extra reach for accessing fasteners in tight or hard-to-reach spaces...

Tork Craft Magnetic Bit Holder — 150 mm, One-Touch Quick-Release, 1/4' Hex (Model T-BH21010150) Extend your reach and speed up bit changes. The Tork Craft T-BH21010150 is a 150 mm magnetic bit holder with a one-touch quick-release sleeve and 1/4' hex shank. It firmly grips standard 1/4' hex bits while giving extra clearance for fastener access in recessed or awkward spaces.....

Tork Craft Magnetic Bit Holder — 300 mm, One-Touch Quick-Release, 1/4' Hex (Model T-BH21010300) Extend your reach and speed up bit changes. The Tork Craft T-BH21010300 is a 300 mm magnetic bit holder with a one-touch quick-release sleeve and 1/4' hex shank. It firmly grips standard 1/4' hex bits while giving extra clearance for fastener access in recessed or awkward spaces.....

Tork Craft Magnetic Bit Holder — 75 mm, One-Touch Quick-Release, 1/4' Hex (Model T-BH21010075) Extend your reach and speed up bit changes. The Tork Craft T-BH21010075 is a 75 mm magnetic bit holder with a one-touch quick-release sleeve and 1/4' hex shank. It firmly grips standard 1/4' hex bits while giving extra clearance for fastener access in recessed or awkward spaces.....

Tork Craft Magnetic Bit Holder — 90 mm, Universal Quick-Release, 1/4″ Hex (Model T-BH30090) The Tork Craft T-BH30090 is a reliable magnetic bit holder with a 90 mm overall length, universal quick-release sleeve for fast bit changes, and a 1/4″ hex shank compatible with standard drivers and screw machines. Supplied in carded packaging for easy identification and storage.....

Tork Craft Magnetic Bit Holder — 100 mm Universal Quick-Release, 1/4' Hex (Model T-BH30100) The Tork Craft T-BH30100 magnetic bit holder provides reliable bit retention and easy quick-release operation. With a 100 mm extension and a 1/4' hex shank, it’s ideal for reaching into confined spaces and for driving screws where precision and control are key. The strong magnet keeps your bit and fastener firmly in place during use.....

Magnetic bit holder Hex shank: 6.35mm (1/4') Length: 54mm Packaging: Carded 1 Application: The bit holder is used with all hex shank 6.35mm bits. The bit holder features a magnet to keep the bit in place and to assist with holding screws when screwdriving. The shank is compatible with the Snap-it! Quick change connectors: TZ AC33A - Snap-it! Quick change connector TZ AC33B - Snap-it! Quick change connector....

Magnetic bit holder Hex shank: 6.35mm (1/4') Length: 60mm Packaging: Carded 1 Application: The bit holder is used with all hex shank 6.35mm bits. The bit holder features a magnet to keep the bit in place and to assist with holding screws when screwdriving. The shank is compatible with the Snap-it! Quick change connectors: TZ AC33A - Snap-it! Quick change connector TZ AC33B - Snap-it! Quick change connector....