AIRCRAFT
The AirCraft brand is a quality solutions manufacturer for all your pneumatic requirements. The range offers a wide selection of pneumatic tools, spray painting equipment, couplers, hoses, and pneumatic tool accessories. Visit the AirCraft website for a comprehensive overview of the brand..
| AirCraft website | Catalogue Download |
Brand: AIRCRAFT
MPN: SD42005
Pressure switch - One way, three phase
The pressure switch is used to start and stop a compressor to maintain pressure in a pneumatic system.
Voltage: Three phase
Unloader connection Brass ferrule
Thread: 1/4 BSP
Ports: One way
Pressure rating: Max 12.5 Bar
Air pressure is important:
Compressors need quite a bit of power to generate compressed air and it is
advised to keep the electrical cable to a minimum length. A 10m cable lead
should have a core thickness of at..
N$ 629.63
Ex VAT:N$ 547.50
Brand: AIRCRAFT
MPN: SG COMPSP-03
AirCraft Pressure Switch SG-COMPSP-03 For Comp 04
At a Glance: Pre-wired replacement pressure switch for AirCraft Comp 04—controls automatic start/stop based on system pressure.
The AirCraft SG-COMPSP-03 Pressure Switch is a dedicated replacement pressure control switch for the AirCraft Comp 04.
Its job is to monitor pressure and manage the compressor’s automatic cycling: switching the compressor on when pressure drops (cut-in) and switching it off when the target pressure is r..
N$ 221.38
Ex VAT:N$ 192.50
Brand: AIRCRAFT
MPN: SG COMPSP-09
AirCraft Pressure Switch SG-COMPSP-09 For Comp 05, Comp06 And Comp07
At a Glance: Pre-wired replacement pressure switch for AirCraft Comp 05/Comp06/Comp07—controls automatic start/stop based on system pressure.
The AirCraft SG-COMPSP-09 Pressure Switch is a dedicated replacement pressure control switch for the AirCraft Comp 05, Comp06 and Comp07 mini compressor units.
This switch helps manage the compressor’s automatic cycling by monitoring system pressure: switching the compres..
N$ 214.48
Ex VAT:N$ 186.50
Brand: AIRCRAFT
MPN: SG PQ2P
AirCraft Professional High Pressure Spray Gun 2.0mm Nozzle Blister Pack (SG PQ2P)
At a Glance: Professional suction feed high-pressure spray gun with metal cup and 2.0mm nozzle—adjustable pattern and fluid control for smooth, even coverage.
When you need strong atomisation and reliable coverage, a proper high-pressure spray gun makes all the difference. The AirCraft SG PQ2P Professional High Pressure Spray Gun is a suction feed design supplied in a convenient blister pack, complete with a ..
N$ 478.40
Ex VAT:N$ 416.00
Brand: AIRCRAFT
MPN: SG MP866
HVLP spray gun 1.4mm
The success behind an HVLP spray gun, is the low amount of overspray.
This is
achieved by having an improved atomization, by using a lower air pressure and a
higher volume of airflow.
HVLP - High Volume Low Pressure
....
N$ 718.18
Ex VAT:N$ 624.50
Brand: AIRCRAFT
MPN: SG MP200
AirCraft Professional Spray Gun Suction Cup HVLP 1.4mm Nozzle (SG MP200)
At a Glance: Professional HVLP suction cup spray gun with a 1.4mm nozzle for smooth, even coverage and better control.
The AirCraft SG MP200 is a professional HVLP spray gun built for clean, controlled spraying with a classic suction cup (bottom feed) setup.
The 1.4mm nozzle size makes it a versatile choice for everyday finishing work where you want consistent atomisation, steady material delivery, and a tidy spray..
N$ 957.95
Ex VAT:N$ 833.00
Brand: AIRCRAFT
MPN: SG PQ2
High pressure spray gun - Ø 2.0 mm
The very first spray guns were high pressure spray guns. The design mostly
relies on air pressure to transfer paint to the surface.
Fully adjustable pattern width making use of a high quality stainless steel
fluid tip and needle.
High pressure spray guns are
also known as traditional or conventional spray guns.
....
N$ 418.60
Ex VAT:N$ 364.00
Brand: AIRCRAFT
MPN: PTFE12-300
PTFE TAPE 12MMX0.075MMX10M IN DISPLAY BOX X300....
N$ 1,403.00
Ex VAT:N$ 1,220.00
Brand: AIRCRAFT
MPN: SG PTFE12-2P
AirCraft PTFE Tape 12mm x 0.075mm x 10m Roll 2 Piece Pack (SG PTFE12-2P)
At a Glance: 2-roll PTFE thread seal tape pack—12mm wide, 0.075mm thick, 10m per roll for leak-resistant threaded joints.
A tiny leak in a threaded joint can waste air, drop pressure, and turn a neat install into a noisy, hissing annoyance. The AirCraft SG PTFE12-2P PTFE Tape is the simple, reliable fix: wrap it on the thread, tighten the fitting, and get a cleaner seal.
Supplied as a 2-piece pack, each roll is 12mm ..
N$ 64.86
Ex VAT:N$ 56.40
Brand: AIRCRAFT
MPN: PTFE12
PTFE Thread Seal Tape
Length: 10m
Width: 12mm
Thickness: 0.075mm (±0.015mm)
Thread seal tape is a film tape commonly used in sealing pipe threads. The tape is wound on a spool, making it easy
to wind around pipe threads.
Using thread seal tape prevents threads from seizing should it need to be unscrewed. The tape also works as a thread
lubricant to seal the joint without making it more difficult to tighten.
Typically the tape is wound around the pipe/fitt..
N$ 4.95
Ex VAT:N$ 4.30
Brand: AIRCRAFT
MPN: PTFE12-5
PTFE Thread Seal Tape - 5/Pack
Length: 10m
Width: 12mm
Thickness: 0.075mm (±0.015mm)
Qty: 5
Thread seal tape is a film tape commonly used in sealing pipe threads. The tape is wound on a spool, making it easy
to wind around pipe threads.
Using thread seal tape prevents threads from seizing should it need to be unscrewed. The tape also works as a thread
lubricant to seal the joint without making it more difficult to tighten.
Typically the tape is wound ar..
N$ 24.15
Ex VAT:N$ 21.00
Brand: AIRCRAFT
MPN: PTFE19
PTFE Thread Seal Tape
Length: 10m
Width: 19mm
Thickness: 0.075mm (±0.015mm)
Thread seal tape is a film tape commonly used in sealing pipe threads. The tape is wound on a spool, making it easy
to wind around pipe threads.
Using thread seal tape prevents threads from seizing should it need to be unscrewed. The tape also works as a thread
lubricant to seal the joint without making it more difficult to tighten.
Typically the tape is wound around the pipe/fitt..
N$ 7.36
Ex VAT:N$ 6.40