4 FLUTE WOOD BORING BIT 24MM

4 FLUTE WOOD BORING BIT 24MM
4 flute wood boring bit

Diameter: Ø24.0mm
Overall length: 165mm
Shank: 6.35mm hex for quick change

Application:

Use the 4 flute boring bit to drill into wood/timber.

A low rpm rotary drill with a planetary gearbox is required to be used with boring bits. It is possible to use a cordless drill, but in its lowest gear.

 

Benefits:

  • The drill spurs have 4 cutting edges that leaves a cleaner and more precise bored hole.
  • Using the same designed screw tip as from an auger drill bit - the 4 flute boring bit feeds itself.
  • The shank can be clamped into a 6.35mm quick change chuck or a standard 3 jaw chuck. It also prevents slipping in a chuck.
  • The edges of the bit have been hardened and remains sharper for longer.
  • The flutes are designed to have excellent chip/shaving clearance.
  • 4 cutting edges means faster cutting and more durability.

CAUTION:
Take care when drilling with wood boring bits. Keep the rotary drill steady with both hands to prevent wrist injury.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
consider safety for your health and the people around you

General safety suggestions:

It is advisable to always have the following items nearby and in a good condition

  • Eye protection – clean and scratch free
  • Hearing protection – quality earmuffs
  • Dust masks – discard old and dirty masks
  • Gloves – for easy handling of material and hand protection
Wear Gloves Eye Protection Hearing Protection Dust Mask
Wear Gloves
Eye Protection
Hearing Protection
Dust Mask
  • Views: 139
  • Brand: TORK CRAFT
  • Product Code: BKP024
  • Availability: 148
0 Product(s) Sold
  • N$ 214.42
  • Ex Tax: N$ 186.45

Tags: 4 flute boring bit, Drill bits, Brand TORK CRAFT