SANDING DISC 115MM 240 GRIT WITH HOLES 10/PK HOOK AND LOOP

SANDING DISC 115MM 240 GRIT WITH HOLES 10/PK HOOK AND LOOP
Sanding disc with hook and loop

For use with random orbital sanders.

SIZE: ø115mm
GRIT: P240
ABRASIVE: Aluminium oxide
HOLES: Yes

Application:

High performance sanding disc for dry finishing on wood or steel. The hook and loop allows for quick sanding disc change.

Align the holes properly with the backing pad for optimum dust extraction.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

What is grit?

Grits explained by Tork Craft When talking about sandpaper 'grit' is a reference to the number of abrasive particles per inch of sandpaper. The lower the grit the rougher the sandpaper and conversely, the higher the grit number the smoother the sandpaper.

This make sense if you imagine how small the particles on an 1000-grit sandpaper would need to be to fit into a 1' square (25,4mm square). Sandpaper is referred to by the size of its grit (Example 120-grit sandpaper or P120 sandpaper).

Hand sandingChoice

You need to choose the grit size of sandpaper depending on the particular job you are trying to accomplish. For heavy sanding and stripping, you need coarse sandpaper measuring 40- to 60-grit; for smoothing surfaces and removing small imperfections, choose 80- to 120-grit sandpaper. For finishing surfaces smoothly, use a super fine sandpaper with 360- to 600-grit. Many jobs require you to “go through the grits.” This means you start the project using lower-grade grit and use finer pieces of sandpaper as you progress. Each time you advance to a higher grit sandpaper, you remove the scratches from the previous layer.

  • Views: 82
  • Brand: TORK CRAFT
  • Product Code: ABR30240
  • Availability: 274
0 Product(s) Sold
  • N$ 65.84
  • Ex Tax: N$ 57.25

Tags: Sanding disc with hook and loop, Abrasives, Brand TORK CRAFT