PLASTIC SLEEVE INSERT 15MMX125MM X10 PER PACK
Out Of Stock
Click Image for Gallery
Plastic mesh sleeves
R-PLS-15125-10
Size: 15 x 125mm
[Qty: 10 | Box]
Plastic mesh sleeve for use with bonded anchors in hollow substrates
- Ensures that the anchor rod is properly centered.
- Reduces consumption of resin
- User-friendly installation in hollow substrates
- Size must be adjusted to the hole depth and diameter
- Hole cleaning is not necessary
Features:
- Ensures that the anchor rod is properly centered.
- Reduces consumption of resin
- User-friendly installation in hollow substrates
- Size must be adjusted to the hole depth and diameter
- Hole cleaning is not necessary
Applications
- For use with R-STUDS threaded rods
Base materials
Approved use in:
- Hollow Brick
- Hollow Lightweight Concrete Block
- Hollow Sand-lime Brick
- Hollow-core Slab
Installation guide
 |
 |
 |
 |
 |
- Drill the hole and clean it up.
- Insert the sleeve in the hole.
- Apply the resin in 100 % of depth of the hole and close the cap.
- Place the stud in the sleeve and wait until full curing of the resin, as stated on the product label.
- After full curing of the anchor, install the fixed element with proper torque.
Rawlplug's plastic sleeve installation