General

VENTURI NOZZLE FOR 60A & 60AP....

AirCraft Tyre Chuck 8mm Hose (SG ATC 09P) (Carded Packaging) At a Glance: Clip-on lever tyre chuck for fast tyre inflation from an 8 mm air hose The AirCraft SG ATC 09P Tyre Chuck for 8mm hose is a tough, workshop-ready connector that makes tyre inflation quicker, cleaner, and far less fiddly. Its brass body and lever-style clamp allow it to clip firmly onto a standard tyre valve and hold securely while you inflate—ideal for hands-free use and reduced air loss. Designed to suit an 8 mm air..

AIR BLOW GUN DUSTER 500MM NOZZLE IN BLISTER....

AIR BLOW GUN DUSTER 800MM NOZZLE IN BLISTER....

PTFE Thread Seal Tape Length: 40m Width: 19mm Thickness: 0.1mm (±0.015mm) Thread seal tape is a film tape commonly used in sealing pipe threads. The tape is wound on a spool, making it easy to wind around pipe threads. Using thread seal tape prevents threads from seizing should it need to be unscrewed. The tape also works as a thread lubricant to seal the joint without making it more difficult to tighten. Typically the tape is wound around the pipe/fittin..

AIR BLOW GUN WITH LONG NOZZLE + ACC KIT FOR 60AP X15....

AirCraft Sand Blast Sand B60 50 Kg Fine And General Purpose (SANDBL-50-2) At a Glance: B60 fine general-purpose blasting media in a 50kg bag for workshop and production blasting. The AirCraft SANDBL-50-2 B60 blasting media is a fine, general-purpose abrasive designed for consistent cleaning and surface preparation. Ideal for blasting cabinets and compatible blasting equipment, it helps remove surface contamination, oxidation, light rust and old coatings while leaving a keyed finish read..

AirCraft Tyre Chuck 6mm Hose (SG ATC 06) At a Glance: Clip-on lever tyre chuck for fast tyre inflation from a 6 mm air hose The AirCraft SG ATC 06 Tyre Chuck for 6mm hose is a simple, dependable upgrade for any workshop or garage air line. With its brass body and lever-style clamp, it clips firmly onto a standard tyre valve and holds on tight while you inflate—no more awkward hand pressure or air leaks while you work. Designed to suit a 6 mm air hose connection, it’s ideal for inflator set..

AirCraft Wash / Paraffin Gun Blister Pack (SG WG01P) At a Glance: Blister pack • 750ml cup • Adjustable 2.0mm nozzle • 1/4" BSP Male air inlet • 0–15 bar working pressure When the job is dirty, the solution should be simple. The AirCraft SG WG01P Wash / Paraffin Gun is designed to spray cleaning liquids with solid control—whether you’re rinsing, degreasing, or laying down a heavier mist to lift stubborn grime. The 750ml cup keeps you working longer between refills, while the adjustable 2.0mm..

AirCraft Sand Blast Sand 150 Grit Aluminium Oxide 1kg (SANDBALCAB-150-1KG) At a Glance: 150 grit aluminium oxide blasting media in a 1kg pack for controlled surface preparation. The AirCraft SANDBALCAB-150-1KG aluminium oxide blasting media is a dependable abrasive for cleaning, etching and surface preparation. With a 150 grit grade, it’s suited to controlled abrasion where you want a more refined finish than coarse blasting media—ideal for removing light rust, oxidation, old coatings, ..