Spare Parts

Festool Long-life chip collection bag SB-Longlife RTS/DTS/ETS Order number: FES201693 Model: SB-Longlife RTS/DTS/ETS ....

Tork Craft Spare Stator For POL02 Wool Bonnet Polisher At a Glance; Genuine stator assembly for the Tork Craft POL02 1200W wool bonnet polisher. Bring tired or burnt-out polishers back into your polishing line-up with this POL02-29 spare stator, made specifically for the Tork Craft POL02 wool bonnet polisher. The stator is the stationary part of the motor that carries the main windings and helps generate the power that drives the spindle. When it fails, the machine may trip, lose power, or..

Tork Craft Polisher Service Kit Spindle Lock Comp. 17/18 For MY3015-2 At a Glance; Genuine spindle lock replacement kit for MY3015-2 polisher The Tork Craft Polisher Service Kit Spindle Lock Comp. 17/18 For MY3015-2 is a genuine spare kit designed to bring your polisher’s spindle lock back into reliable working order. Over time, the spindle lock mechanism can wear or become damaged, making it difficult or unsafe to change backing pads and accessories. This MY3015-2-SK01 kit..

Tork Craft Polisher Serv. Kit Gear Box Cover And Screw (12/19/20) For MY3015-2 At a Glance; Genuine gear box cover and screw kit for MY3015-2 polisher The Tork Craft Polisher Serv. Kit Gear Box Cover And Screw (12/19/20) For MY3015-2 is a genuine replacement kit that restores the front gear box housing on your polisher. Over time, the cover or its mounting screws can become cracked, stripped or damaged through knocks and heavy use. This MY3015-2-SK02 kit supplies the correc..

Tork Craft Polisher Service Kit Gear & Bearing Comp. (1-11) For MY3015-2 At a Glance; Genuine gear and bearing kit for MY3015-2 burnishing machine The Tork Craft Polisher Service Kit Gear & Bearing Comp. (1-11) For MY3015-2 is a factory-approved set of drive components for the MY3015-2 stainless burnishing machine. Continuous heavy use can eventually wear gears and bearings, causing noise, vibration and loss of power. This MY3015-2-SK03 kit groups the main gear and bearing ..

Tork Craft Polisher Service Kit Aux Handle (50) For MY3015-2 At a Glance; Genuine side handle replacement for MY3015-2 polisher The Tork Craft Polisher Service Kit Aux Handle (50) For MY3015-2 is a genuine replacement side handle that brings your polisher back to full, two-handed control. If the original handle has gone missing, cracked or worn, this MY3015-2-SK04 kit lets you fit a new auxiliary handle so you can guide the machine more safely and comfortably while pol..

Tork Craft Bearing And Retainer (26/27) For MY3015-2 At a Glance; Genuine bearing and retainer kit for MY3015-2 polisher The Tork Craft Bearing And Retainer (26/27) For MY3015-2 is a genuine replacement kit designed to keep your polisher or burnishing machine running smoothly. Bearings work hard under load and can eventually wear out, leading to extra noise, vibration and reduced performance. This MY3015-2-SK05 kit replaces the bearing and its matching retainer (identi..

Tork Craft Polisher Service Kit Armature (28) For MY3015-2 At a Glance; Genuine replacement armature for MY3015-2 polisher The Tork Craft Polisher Service Kit Armature (28) For MY3015-2 is the genuine replacement motor armature for your MY3015-2 polisher or burnishing machine. Hard work, dust and overload can eventually damage the original armature, leading to loss of power, excessive sparking or a motor that will not run at all. Swapping in the correct MY3015-2-SK06 a..

Tork Craft Polisher Service Kit Armature Rear Bearing And Shield (29–32) For MY3015-2 At a Glance; Genuine rear bearing and shield kit for MY3015-2 armature The Tork Craft Polisher Service Kit Armature Rear Bearing And Shield (29–32) For MY3015-2 is designed to keep the motor running smoothly where it matters most – at the rear of the armature. As bearings wear, you will often feel extra vibration, hear more noise and notice the tool working harder than it should. This serv..

Tork Craft Polisher Service Kit Stator (33/34) For MY3015-2 At a Glance; Genuine stator assembly for MY3015-2 burnishing machine The Tork Craft Polisher Service Kit Stator (33/34) For MY3015-2 is a factory-approved replacement stator for the MY3015-2 stainless burnishing machine. Heavy use, dust and overload can overheat or damage the original stator windings, leading to poor performance or a motor that will not start. Fitting the correct MY3015-2-SK08 stator brings th..

Tork Craft Polisher Service Kit Housing (35) For MY3015-2 At a Glance; Genuine replacement housing section for MY3015-2 polisher The Tork Craft Polisher Service Kit Housing (35) For MY3015-2 is a genuine replacement motor housing section for the MY3015-2 burnishing machine. Hard knocks, drops or years of service can leave the original casing cracked, worn or difficult to assemble. This service kit supplies the correct housing component so you can restore the tool’s str..