Routers

Festool OF 1400 EBQ-Plus Plunge Router At a Glance: 1400 W precision plunge router with a 70 mm routing stroke, 1/10 mm depth setting and up to 99% dust extraction with chip deflector and extraction hood. The Festool OF 1400 EBQ-Plus is the handy multi-talent that feels equally at home shaping edges, cutting grooves, routing recesses for hardware, or following a template with confidence. It’s powerful enough for demanding work, but still light and controllable for accurate hand rou..

Festool OF 2200 EB-Plus Plunge Router At a Glance: 2 200 W power pack with enormous torque, 80 mm plunge stroke and precise 1/10 mm depth setting with up to 99% dust extraction. The Festool OF 2200 EB-Plus is the “no excuses” plunge router for heavy routing tasks—hard timber, thick worktops, deep grooves, large cut-outs and demanding profiles. With a muscular 2 200 W motor and electronic control that keeps torque strong at low speeds, it stays composed when other routers start comp..

Festool Accessories set SYS3 M 137 FS/2-Set Order number: FES577157 Model: SYS3 M 137 FS/2-Set ....

Festool Module edge router MFK 700 EQ/B-Plus Order number: FES576241 Model: MFK 700 EQ/B-Plus ....

Tork Craft Screw & Lever Kit (6-7) Service Kit (TCCS0185-SK02) At a Glance: Replacement screw and lever set (parts 6 & 7) for adjustment/locking functions on the Tork Craft TCCS0185 cut-off saw Cut-off saws live in a world of vibration, metal dust and “just tighten it a bit more”… which is exactly how screws get stripped and levers get bent or snapped. When a locking lever won’t hold, or a screw no longer tightens securely, your adjustments become sloppy — and that can affect both accuracy..

Tork Craft Lever Plate & Stop Collar (24-28) Service Kit (TCCS0185-SK07) At a Glance: Lever plate and stop collar component kit (parts 24–28) for the Tork Craft TCCS0185 cut-off saw In a cut-off saw, the “small linkage bits” do big jobs. Lever plates guide motion and transfer force where it’s needed, while a stop collar helps locate parts and limit travel so the mechanism returns to the right position every time. When these parts wear, bend or loosen, the saw can feel sloppy, inconsistent,..

Tork Craft Cord Set Compl. (47-49/57) Service Kit (TCCS0185-SK11) At a Glance: Complete replacement cord set (parts 47–49 and 57) for the Tork Craft TCCS0185 cut-off saw A cut-off saw cable gets dragged, tugged, kinked and occasionally “tested” against sharp edges and hot sparks. When the cord is damaged or internal connections become loose, you can get intermittent power, cutting out under load, tripping, or a very unsafe shock hazard. The Tork Craft TCCS0185-SK11 Cord Set Complete replac..

Tork Craft Carbon Brush (53) Service Kit (TCCS0185-SK14) At a Glance: Replacement carbon brush for the Tork Craft TCCS0185 cut-off saw – part 53 Carbon brushes are consumable service items — they deliver electricity into the spinning armature, and over time they simply wear down. When a brush is worn, weak or damaged, you’ll often notice reduced power, intermittent cutting out, a “surging” feel under load, or excessive sparking at start-up. The Tork Craft TCCS0185-SK14 Carbon Brush replace..

Festool TID 18 HPC 4,0 I-Set T18 Screwdriver and Drill Bit Set At a Glance: Professional 18V Festool combo set with TID 18 cordless impact driver, T18+3 cordless drill, 2 x 4.0 Ah HighPower batteries, charger and Systainer storage. The Festool TID 18 HPC 4,0 I-Set T18 is a serious cordless combination for tradespeople, installers, cabinetmakers and woodworkers who need both flexibility and raw fastening power in one premium kit. Inside one Systainer you get the T18+3 cordless drill for accur..