25.4mm drum sanding sleeves

drum sleeve

Drum sanding sleeves to use with drum sanding arbor.[click here]

SIZE: Ø 25.4mm
GRIT: P180

These sleeves fit onto arbor code TCDS25

Write a review

Note: HTML is not translated!
    Bad           Good

What is grit?

Grits explained by Tork Craft When talking about sandpaper 'grit' is a reference to the number of abrasive particles per inch of sandpaper. The lower the grit the rougher the sandpaper and conversely, the higher the grit number the smoother the sandpaper.

This make sense if you imagine how small the particles on an 1000-grit sandpaper would need to be to fit into a 1' square (25,4mm square). Sandpaper is referred to by the size of its grit (Example 120-grit sandpaper or P120 sandpaper).

Hand sandingChoice

You need to choose the grit size of sandpaper depending on the particular job you are trying to accomplish. For heavy sanding and stripping, you need coarse sandpaper measuring 40- to 60-grit; for smoothing surfaces and removing small imperfections, choose 80- to 120-grit sandpaper. For finishing surfaces smoothly, use a super fine sandpaper with 360- to 600-grit. Many jobs require you to “go through the grits.” This means you start the project using lower-grade grit and use finer pieces of sandpaper as you progress. Each time you advance to a higher grit sandpaper, you remove the scratches from the previous layer.

  • Views: 92
  • Brand: TORK CRAFT
  • Product Code: TCDS25180
  • Availability: 259
0 Product(s) Sold
Hurry, This Offer Expires in:
  • N$ 45.60
  • N$ 27.36
  • Ex Tax: N$ 23.79

Tags: Drum sanding, Abrasive, Brand TORK CRAFT