MINI ENGRAVING CUTTER 0.8MM REV. TAPER 2.4MM SHANK

-40% MINI ENGRAVING CUTTER 0.8MM REV. TAPER 2.4MM SHANK
Steel engraving cutter - Ø 1.6mm - Spherical

The steel engraving cutter is designed to be accurate, precise and compact for engraving fine and intricate projects using a rotary tool.

Applications:

  • Carving
  • Engraving
  • Routing

It is suitable for engraving on the following materials:

  • Wood
  • Fiberglass
  • Soft metals
  • Plaster
  • Plastic

QTY: 1

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
At a glance
  • Allows for compact and accurate engraving
  • Fits standard collets
  • Wide range available - Tools for every job
Specifications
Description Specification
Sphere diameter Ø 1.6mm
Shank diameter Ø 2.4mm

 

Fitting the tool bit

The shank is securely locked in place by fitting it in the corresponding collet or making use of a keyless chuck.

For improved accuracy, make use of a flexible shaft connected to the rotary tool.

Rotation speed:

Most rotary tools have the benefit to adjust the rotation speed. Many tool bits that fit in rotary tools have a maximum speed setting. This can normally be found on the packaging.

All materials react differently to speed and will need the tool bit to rotate slower. It is recommended to start using accessories on the slower speed first, before increasing the speed as needed.

The diameter of the tool bit fitted also determines the rotation speed. The larger the diameter, the slower the speed. If the speed is set too high, it could bend the shank/shaft resulting in injury.

consider safety for your health and the people around you

General safety suggestions:

It is advisable to always have the following items nearby and in a good condition

  • Eye protection – clean and scratch free
  • Hearing protection – quality earmuffs
  • Dust masks – discard old and dirty masks
  • Gloves – for easy handling of material and hand protection
Wear Gloves Eye Protection Hearing Protection Dust Mask
Wear Gloves
Eye Protection
Hearing Protection
Dust Mask
  • Views: 68
  • Brand: TORK CRAFT
  • Product Code: TC08321
  • Availability: 428
0 Product(s) Sold
Hurry, This Offer Expires in:
  • N$ 15.12
  • N$ 9.07
  • Ex Tax: N$ 7.89

Tags: Engraving cutters, Mini Rotary, Brand TORK CRAFT