Hose Adaptors / Tails

AirCraft Hosetail 1/4" ftm X 6mm Bulk - SG12010 At a Glance: 6 mm hose tail to 1/4" male BSP adaptor The AirCraft SG12010 Hosetail adaptor is the simple, workshop-trusted way to connect a 6 mm hose line to a 1/4" threaded air fitting. One end features a 6 mm barbed hose tail that grips inside the hose for a secure hold, while the other end provides a 1/4" male BSP thread for easy connection to regulators, manifolds, valves, quick couplers, and other pneumatic components. Ideal for compress..

AirCraft Hosetail 1/4" ft Male X 8mm Bulk - SG12020 At a Glance: 8 mm hose tail to 1/4" male BSP adaptor The AirCraft SG12020 Hosetail adaptor is a dependable way to connect an 8 mm hose line to a 1/4" threaded pneumatic fitting. One end features an 8 mm barbed hose tail that grips inside the hose for a secure hold, while the other end provides a 1/4" male BSP thread for easy connection to regulators, manifolds, valves, quick couplers, and other compressed air components. Ideal for repairs..

AirCraft Hosetail 1/4" ft X 10mm Bulk - SG12030 At a Glance: 10 mm hose tail to 1/4" male BSP adaptor The AirCraft SG12030 Hosetail adaptor is a sturdy, workshop-ready way to connect a 10 mm hose line to a 1/4" threaded pneumatic fitting. One end features a 10 mm barbed hose tail that grips inside the hose for a secure hold, while the other end provides a 1/4" male BSP thread for easy connection to regulators, manifolds, valves, quick couplers, and other compressed air components. Ideal fo..

AirCraft Hosetail 1/4"F x 6mm Bulk (SG13010) At a Glance: 6mm hose tail to 1/4" Female BSP (F) connection The AirCraft SG13010 Hosetail is your go-to adaptor for joining a 6mm hose to a 1/4" Female BSP threaded connection—clean, simple, and workshop-tough. Whether you’re repairing an air line, building a custom pneumatic setup, or replacing a worn connector, this hosetail gives you a snug hose grip and a dependable threaded interface where it counts. Supplied in bulk, it’s ..

AirCraft Hosetail 1/4"F x 8mm Bulk (SG13040) At a Glance: 8mm hose tail to 1/4" inch Female BSP (F) connection The AirCraft SG13040 Hosetail is a practical adaptor for connecting a 8mm air hose to a 1/4" inch Female BSP threaded fitting. It’s a dependable choice for compressed-air lines, pneumatic setups, and general workshop maintenance where you need a secure hose grip and a correctly matched threaded interface. Supplied in bulk, it’s especially handy for service departme..

AirCraft Connector Hosetail 1/4"F x 8mm 2pack (SG13040P) At a Glance: 8mm hose tail to 1/4" inch Female BSP (F) connection — 2-pack The AirCraft SG13040P Connector Hosetail 2pack is a practical fitting set for connecting a 8mm air hose to a 1/4" inch Female BSP threaded interface. It’s a tidy solution for compressed-air lines, pneumatic setups and routine maintenance—ideal when you want a secure hose grip, correct thread compatibility and a clean finish. With two fittings i..

AirCraft Hosetail 1/4"F x 10mm Bulk (SG13050) At a Glance: 10mm hose tail to 1/4" inch Female BSP (F) connection The AirCraft SG13050 Hosetail is a hardworking adaptor for connecting a 10mm air hose to a 1/4" inch Female BSP threaded fitting. It’s a solid choice for compressed-air lines and pneumatic systems where you need a secure hose grip, correct thread compatibility and a neat, serviceable finish. Supplied in bulk, it suits busy workshops, maintenance teams and spares ..

AirCraft Brass Hose Tail Connector – 1/4" Female x 8mm (SBF1258) At a Glance: 1/4" Female Thread x 8mm Hose Tail in Solid Brass When you need a tidy, dependable connection between a threaded port and an 8mm hose, this AirCraft brass hose tail connector gets it done with zero fuss. The hose tail (barb) grips the inside of the hose for a snug mechanical hold, while the 1/4" female thread makes it easy to integrate into common air line and pneumatic setups. Perfect for quick repairs, ..

AirCraft Hose Tail Connector Brass – 1/4" Female x 8mm (1pc Pack) (SBF1258P) At a Glance: 1/4" Female Thread to 8mm Hose Tail – Convenient 1pc Pack Need one fitting to finish the job or sort a quick repair? The AirCraft SBF1258P is the same practical brass hose tail connector in a handy single-piece pack. It links a 1/4" female threaded port to an 8mm hose tail (barb), making it ideal for workshop compressed air lines, pneumatic tools, and tidy hose builds. Push the hose fully onto..

AirCraft Hose Tail Connector Brass – 1/4" Female x 10mm (1pc Pack) (SBF1259P) At a Glance: 1/4" Female Thread to 10mm Hose Tail – Convenient 1pc Pack When you only need one fitting to finish an install or sort a quick repair, the AirCraft SBF1259P delivers the perfect no-waste solution. This solid brass connector links a 1/4" female threaded port to a 10mm hose tail (barb), making it ideal for workshop compressed air lines, pneumatic tools, and custom hose assemblies. Push the hose..

AirCraft Hose Tail Connector Brass – 1/4" Female x 12mm (1pc Pack) (SBF1260P) At a Glance: 1/4" Female Thread to 12mm Hose Tail – Convenient 1pc Pack For those “just need one” jobs, the AirCraft SBF1260P gives you the same tough brass hose tail connector in a handy single-piece pack. It connects a 1/4" female threaded port to a 12mm hose tail (barb), making it ideal for workshop compressed air lines, pneumatic tools, and custom hose assemblies. Push the hose fully onto the tail, cl..

AirCraft Hose Tail Connector Brass – 1/4" Male x 6mm (1pc Pack) (SBM1257P) At a Glance: 1/4" Male Thread to 6mm Hose Tail – Convenient 1pc Pack For quick fixes and small installs, the AirCraft SBM1257P gives you a tough brass hose tail connector in a handy single-piece pack. It joins a 6mm hose to a 1/4" male threaded connection, making it ideal for compact pneumatic lines, compressed air routing, and workshop maintenance. Push the hose fully onto the tail, clamp it correctly, then..