Power Tools
Brand: AIRCRAFT
MPN: AT0018-02
AirCraft Outer Sleeve for Air Hydraulic Riveter (AT0018-02)
At a Glance: Replacement outer sleeve assembly for AirCraft air hydraulic riveters—supports the front-end mechanism for smooth, controlled riveting.
The AirCraft AT0018-02 Outer Sleeve is a key front-end component for an AirCraft Air Hydraulic Riveter. This sleeve forms part of the nose/front assembly, helping keep internal parts aligned and protected while the tool applies pulling force on rivet mandrels.
If your rivet..
N$ 386.00
Ex VAT:N$ 335.65
Brand: AIRCRAFT
MPN: AT0018-04
AirCraft Jaw Assembly 3 Piece for Air Hydraulic Riveter (AT0018-04)
At a Glance: 3-piece replacement jaw set for AirCraft air hydraulic riveters—grips the mandrel securely for consistent pulling power and clean rivet setting.
The AirCraft AT0018-04 Jaw Assembly is a 3-piece jaw set that forms the gripping heart of an Air Hydraulic Riveter. These jaws bite onto the rivet mandrel and pull it with controlled force to set the rivet properly. Over time, jaw teeth wear, jaws glaze, and gri..
N$ 257.89
Ex VAT:N$ 224.25
Brand: AIRCRAFT
MPN: AT0018-24
AirCraft Air Cylinder Cover for Air Hydraulic Riveter (AT0018-24)
At a Glance: Replacement air cylinder cover components for AirCraft air hydraulic riveters—supports sealing and smooth cycling for consistent riveting performance.
The AirCraft AT0018-24 Air Cylinder Cover is a critical service part for the air cylinder section of an AirCraft Air Hydraulic Riveter. The cylinder cover forms part of the air motor/cylinder assembly, helping to locate internal components, support sealing s..
N$ 417.62
Ex VAT:N$ 363.15
Brand: AIRCRAFT
MPN: AT0018-C02
AirCraft Wrench for Air Hydraulic Riveter (AT0018-C02)
At a Glance: Service wrench for AirCraft air hydraulic riveters—designed to fit riveter fittings and nose components for quick, secure maintenance.
The AirCraft AT0018-C02 Wrench is the correct tool to keep your Air Hydraulic Riveter properly serviced and ready for work. It’s designed to suit key fittings and nose/front-end components, making it easier to tighten, loosen, and maintain parts without slipping, rounding, or damaging..
N$ 33.98
Ex VAT:N$ 29.55
Brand: AIRCRAFT
MPN: AT0018-C03
AirCraft Wrench for Air Hydraulic Riveter (AT0018-C03)
At a Glance: Service wrench/spanner for AirCraft air hydraulic riveters—made for loosening and tightening riveter front-end and fitting components with a proper fit.
The AirCraft AT0018-C03 Wrench is a dedicated service spanner for maintaining an AirCraft Air Hydraulic Riveter. It’s designed to fit specific riveter fittings and front-end parts so you can tighten and loosen components cleanly—without slipping, rounding edges, or i..
N$ 33.98
Ex VAT:N$ 29.55
Brand: AIRCRAFT
MPN: AT0026-10
AirCraft Rotor Blade (x5) For Air Palm Sander AT0026 (AT0026-10)
At a Glance: Pack of 5 replacement rotor blades (vanes) to restore power and smooth running on the AirCraft AT0026 air palm sander.
Your air palm sander’s motor relies on rotor blades (also called vanes) to convert compressed air into consistent torque. Over time, blades wear down, lose their seal inside the rotor, and the tool starts to feel weak, uneven or slow to spin up. The AirCraft AT0026-10 Rotor Blade Set (x5) is a di..
N$ 13.69
Ex VAT:N$ 11.90
Brand: AIRCRAFT
MPN: AT0026-25
AirCraft 6" Sanding Pad For Air Palm Sander AT0026 (AT0026-25)
At a Glance: Replacement 6" sanding pad (backing pad) for the AirCraft AT0026 air palm sander—built to keep discs stable for a smoother finish.
The sanding pad is the business-end of your air palm sander: it supports the disc, keeps it running true, and helps deliver an even finish without chatter or gouging. When a pad gets worn, out-of-round, torn, or the face loses grip, you’ll feel it immediately—more vibration, poor disc h..
N$ 321.48
Ex VAT:N$ 279.55
Brand: AIRCRAFT
MPN: AT0028
AirCraft Stapler 21g 12.7mm Crown Uses 6mm–25mm Staples (AT0028)
At a Glance: 21 gauge stapler with 12.7mm crown, compatible with 6mm to 25mm staples for clean, fast fastening.
The AirCraft AT0028 pneumatic stapler is built for quick, tidy fastening when you want a professional finish with less effort.
Designed for 21 gauge staples with a 12.7mm crown, it accepts staple lengths from 6mm right up to 25mm—making it a versatile go-to for light to medium-duty fixing work.
Whether you’re ..
N$ 3,768.55
Ex VAT:N$ 3,277.00
Brand: AIRCRAFT
MPN: AT0029
AirCraft Air Nailer 18g F-nailer 15mm-50mm Brad Nail 110pc Cap. (F50) Prof (AT0029)
At a Glance: Professional 18-gauge brad nailer for 15mm–50mm brads with a 110-nail magazine.
The AirCraft AT0029 is a professional pneumatic brad nailer built for fast, tidy fastening when appearance matters.
Using 18-gauge (F-type) brad nails from 15mm to 50mm, it’s ideal for trim work, cabinet making, panelling, light framing and general workshop assembly where you want a secure hold without bulky fast..
N$ 3,925.53
Ex VAT:N$ 3,413.50
Brand: AIRCRAFT
MPN: AT0030
AIR NAILER 16G T-NAILER 19MM-50MM BRAD NAIL 100PC CAP (T50) PROF....
N$ 6,123.87
Ex VAT:N$ 5,325.10
Brand: AIRCRAFT
MPN: AT0028-SK01
STAPLER S/KIT SEAL & GASKET (6-8/10-12/14/16/17/23/25-28/30-32/35/65/6....
N$ 288.42
Ex VAT:N$ 250.80
Brand: AIRCRAFT
MPN: AT0028-SK02
STAPLER S/KIT CAP & DEFLECTOR (1-5) FOR AT0028....
N$ 529.40
Ex VAT:N$ 460.35