Clamps / Jigs
Brand: TORK CRAFT
MPN: TCV01810
Vice & Drill Clamp Kit
Jaw Width: 78mm
Opening: 50mm
Horizontal rotation: 360°
Tilt: 0-90°
The vice can be fastened with the supplied screw onto the end of a workbench with a table thickness less than 50mm.
The vice is used to secure a workpiece within its jaws to allow work to be done on it.
The vice includes a lockable ball joint to allow the vice to be rotated and tilted. An adaptor is supplied to hold a
portable drill with a collar diam..
N$ 760.50
Ex VAT:N$ 661.30
Brand: TORK CRAFT
MPN: TCV07565
Quick Release Corner Clamp
Jaw Width: 75mm
Maximum Jaw Opening: 65mm
A corner clamp quick release is a specialized tool designed to securely hold two pieces of wood together at a
90-degree angle. Unlike traditional clamps, which require manual tightening and loosening, a quick release mechanism
allows for rapid and efficient clamping and unclamping.
The corner clamp can be used for framing or light weight joinery. There is a cutting groove to allow a framing handsa..
N$ 774.12
Ex VAT:N$ 673.15
Brand: TORK CRAFT
MPN: TCV08075
Corner clamp 90°
Jaw width: 80mm
Opening: 75mm
A corner clamp, specifically one with dimensions 80x75mm, is a tool used to hold two pieces of material at a precise 90-degree angle, facilitating accurate and stable assembly.
The corner clamp can be used for framing or light weight joinery.
There is a cutting groove to allow a framing handsaw to cut a mitre at 45°.
Application:
DIY
Wood working
Picture Frame Holding
Workshop....
N$ 330.40
Ex VAT:N$ 287.30
Brand: TORK CRAFT
MPN: TCV09568
Corner clamp 90°
Jaw width: 95mm
Opening: 68mm
A corner clamp is a tool used to hold two pieces of material at a precise 90-degree angle, facilitating accurate and stable assembly.
It can be used for framing or light weight joinery. The swivelling head applies even force when clamping two different widths of timber at 90°.
Application:
DIY
Wood working
Picture Frame Holding
Workshop....
N$ 662.46
Ex VAT:N$ 576.05
Brand: TORK CRAFT
MPN: BIS020
Biscuits
Box of 1000 biscuits for a biscuit joiner #20
Application:
A biscuit joiner is a woodworking tool used to join two pieces of wood
together. In this case it would be used to join with the biscuit #20.
A biscuit joiner uses a small circular saw blade to cut a crescent-shaped hole
in the opposite edges of two pieces of wood or wood composite panels.
An oval-shaped, highly-dried and compressed wooden biscuit (made f..
N$ 1,014.01
Ex VAT:N$ 881.75
Brand: TORK CRAFT
MPN: CL CICC3A
G-clamp set
Clamps in the set:
(x1) G-clamp with 25mm clamp capacity.
(x1) G-clamp with 50mm clamp capacity.
(x1) G-clamp with 75mm clamp capacity.
Application:
The G-clamp is used to secure workpieces to a bench or a template during an
assembly. It can also be used in woodwork projects to glue/join pieces of wood.
The G-clamp is manufactured from carbon steel and has been powder coated.....
N$ 261.45
Ex VAT:N$ 227.35
Brand: TORK CRAFT
MPN: CL CICC3B
G-clamp set
Clamps in the set:
(x1) G-clamp with 50mm clamp capacity.
(x1) G-clamp with 75mm clamp capacity.
(x1) G-clamp with 101mm clamp capacity.
Application:
The G-clamp is used to secure workpieces to a bench or a template during an
assembly. It can also be used in woodwork projects to glue/join pieces of wood.
The G-clamp is manufactured from carbon steel and has been powder coated.....
N$ 406.70
Ex VAT:N$ 353.65
Brand: TORK CRAFT
MPN: CL CICC4B
C-clamp set
Clamps in the set:
(x2) C-clamp with 25mm clamp capacity.
(x2) C-clamp with 50mm clamp capacity.
Application:
The C-clamp is used to secure workpieces to a bench or a template during an
assembly. It can also be used in woodwork projects to glue/join pieces of wood.
The C-clamp is manufactured from carbon steel and has been powder coated.....
N$ 316.08
Ex VAT:N$ 274.85
Brand: TORK CRAFT
MPN: CL FCG120-1000
F-type clamp
Clamping
length:
1000mm
Throat: 120mm
Rail: Steel
Jaws: Malleable cast iron
Spindle: Steel
Handle: Wood
Application:
The F-type clamp is also referred to as a speed clamp. It is similar to a G-clamp
in use, but has a wider throat (opening capacity) and is faster to clamp and to
readjust.
Use in woodworking:
Wood assembly and joinery (screws, glue, biscuits).
Clamping down edging to board material.
Use in metalworking:
Holding piece..
N$ 821.85
Ex VAT:N$ 714.65
Brand: TORK CRAFT
MPN: CL FCG120-1200
F-type clamp
Clamping
length:
1200mm
Throat: 120mm
Rail: Steel
Jaws: Malleable cast iron
Spindle: Steel
Handle: Wood
Application:
The F-type clamp is also referred to as a speed clamp. It is similar to a G-clamp
in use, but has a wider throat (opening capacity) and is faster to clamp and to
readjust.
Use in woodworking:
Wood assembly and joinery (screws, glue, biscuits).
Clamping down edging to board material.
Use in metalworking:
Holding piece..
N$ 1,011.54
Ex VAT:N$ 879.60
Brand: TORK CRAFT
MPN: CL FCG120-1500
F-type clamp
Clamping
length:
1500mm
Throat: 120mm
Rail: Steel
Jaws: Malleable cast iron
Spindle: Steel
Handle: Wood
Application:
The F-type clamp is also referred to as a speed clamp. It is similar to a G-clamp
in use, but has a wider throat (opening capacity) and is faster to clamp and to
readjust.
Use in woodworking:
Wood assembly and joinery (screws, glue, biscuits).
Clamping down edging to board material.
Use in metalworking:
Holding piece..
N$ 1,226.53
Ex VAT:N$ 1,066.55
Brand: TORK CRAFT
MPN: CL FCG120-2000
F-type clamp
Clamping
length:
2000mm
Throat: 120mm
Rail: Steel
Jaws: Malleable cast iron
Spindle: Steel
Handle: Wood
Application:
The F-type clamp is also referred to as a speed clamp. It is similar to a G-clamp
in use, but has a wider throat (opening capacity) and is faster to clamp and to
readjust.
Use in woodworking:
Wood assembly and joinery (screws, glue, biscuits).
Clamping down edging to board material.
Use in metalworking:
Holding piece..
N$ 1,548.88
Ex VAT:N$ 1,346.85