Calipers

Digital vernier caliper Measuring length: 300mm Readout: Digital Material: Stainless steel Accuracy: 0.01mm Application: The vernier caliper is used to give a direct reading of the distance measured with high accuracy and precision. There are two different vernier calipers available in the Tork Craft range: Analog vernier calipers. Digital vernier calipers.   Before using a vernier caliper: Make sure the workpiece being measuring is clean and has no burrs on..

Digital vernier caliper Measuring length: 150mm Readout: Digital (memory hold) Material: Stainless steel Accuracy: 0.01mm Application: The vernier caliper is used to give a direct reading of the distance measured with high accuracy and precision. There are two different vernier calipers available in the Tork Craft range: Analog vernier calipers. Digital vernier calipers.   Before using a vernier caliper: Make sure the workpiece being measuring is clean and h..

Dial Caliper 150 mm - SERIES 101 Manufacturer Cat No: 101-006-11 Range: 0 mm - 150 mm Shockproof dial caliper made of stainless steel. Application Measure outside measurements Measure inside measurements Measure depth....

Dial Caliper 150 mm - SERIES 101 Manufacturer Cat No: 101-006-21 Range: 0 mm - 150 mm Shockproof dial caliper made of stainless steel. Application Measure outside measurements Measure inside measurements Measure depth....

Dial Caliper 200 mm - SERIES 101 Manufacturer Cat No: 101-008-11 Range: 0 mm - 200 mm Graduation: 0,01 mm Accuracy: ±0,03 mm Shockproof dial caliper made of stainless steel. Application Measure outside measurements Measure inside measurements Measure depth....

Dial Caliper 200 mm - SERIES 101 Manufacturer Cat No: 101-008-21 Range: 0 mm - 200 mm Graduation: 0,02 mm Accuracy: ±0,03 mm Shockproof dial caliper made of stainless steel. Application Measure outside measurements Measure inside measurements Measure depth....

Dial Caliper 300 mm - SERIES 101 Manufacturer Cat No: 101-012-11 Range: 0 mm - 300 mm Graduation: 0,01 mm Accuracy: ±0,04 mm Shockproof dial caliper made of stainless steel. Application Measure outside measurements Measure inside measurements Measure depth....

Dial Caliper 300 mm - SERIES 101 Manufacturer Cat No: 101-012-21 Range: 0 mm - 300 mm Graduation: 0,02 mm Accuracy: ±0,04 mm Shockproof dial caliper made of stainless steel. Application Measure outside measurements Measure inside measurements Measure depth....

Digital Caliper 150 mm IP54 - SERIES 111 Manufacturer Cat No: 111-006-11 Range: 0 mm - 150 mm | 0 in - 6 in Resolution: 0,01 mm or 0.0005 in Accuracy: ±0,03 mm Electronic caliper IP54 ABS with digital output Workshop electronic caliper with measuring range of 0 -150mm / 6 'and measuring resolution 0.01mm / 0.0005'. It has an IP54 protection rating - from dust, oil and water jets and meets the DIN862 standard. The calip..

Digital Caliper 150 mm SERIES 111-12 Manufacturer Cat No: 111-006-12 Range: 0 mm - 150 mm Resolution: 0,01 mm or 0.0005 in Accuracy: ±0,03 mm Electronic caliper with digital output Workshop electronic caliper with measuring range of 0 -150mm | 6' and measuring resolution 0,01mm / 0.0005'. It fully meets the DIN862 standard and equipped with a data output socket for recording measurements by computer..

Digital Caliper 200 mm IP54 - SERIES 111 Manufacturer Cat No: 111-008-11 Range: 0 mm - 200 mm | 0 in - 8 in Resolution: 0,01 mm or 0.0005 in Accuracy: ±0,03 mm Electronic caliper IP54 ABS with digital output Workshop electronic caliper with measuring range of 0 -200mm / 8' and measuring resolution 0.01mm / 0.0005'. It has an IP54 protection rating - from dust, oil and water jets and meets the DIN862 standard. The..