Engraving / Milling
Brand: TORK CRAFT
MPN: TC08326
Diamond point - Ø 2.0mm - Cylindrical
The tip of the bit is coated with diamond particles to allow it to be used for engraving, carving and smoothing.
The diamond point can be used on:
Glass
Ceramic
Semi-precious stones
Metals
QTY: 1....
N$ 18.06
Ex VAT:N$ 15.70
Brand: TORK CRAFT
MPN: TC08327
Diamond point - Ø 2.0mm - Spherical
The tip of the bit is coated with diamond particles to allow it to be used for engraving, carving and smoothing.
The diamond point can be used on:
Glass
Ceramic
Semi-precious stones
Metals
QTY: 1....
N$ 12.02
Ex VAT:N$ 10.45
Brand: TORK CRAFT
MPN: TC08328
Diamond point - Ø 4.4mm - Spherical
The tip of the bit is coated with diamond particles to allow it to be used for engraving, carving and smoothing.
The diamond point can be used on:
Glass
Ceramic
Semi-precious stones
Metals
QTY: 1....
N$ 12.02
Ex VAT:N$ 10.45
Brand: TORK CRAFT
MPN: TC08329
Diamond point - Ø 5mm - Reverse taper
The tip of the bit is coated with diamond particles to allow it to be used for engraving, carving and smoothing.
The diamond point can be used on:
Glass
Ceramic
Semi-precious stones
Metals
QTY: 1....
N$ 26.85
Ex VAT:N$ 23.35
Brand: TORK CRAFT
MPN: TC08330
Diamond point - Ø 6.7mm - Disc
The tip of the bit is coated with diamond particles to allow it to be used for engraving, carving and smoothing.
The diamond point can be used on:
Glass
Ceramic
Semi-precious stones
Metals
QTY: 1....
N$ 26.85
Ex VAT:N$ 23.35
Brand: TORK CRAFT
MPN: TC08331
Diamond point - Ø 2.4mm - Cylindrical
The tip of the bit is coated with diamond particles to allow it to be used for engraving, carving and smoothing.
The diamond point can be used on:
Glass
Ceramic
Semi-precious stones
Metals
QTY: 1....
N$ 18.06
Ex VAT:N$ 15.70
Brand: TORK CRAFT
MPN: TC08333
Diamond point - Ø 0.9mm - Point
The tip of the bit is coated with diamond particles to allow it to be used for engraving, carving and smoothing.
The diamond point can be used on:
Glass
Ceramic
Semi-precious stones
Metals
QTY: 1....
N$ 18.06
Ex VAT:N$ 15.70
Brand: TORK CRAFT
MPN: TC08334
Diamond point - Ø 1.2mm - Point
The tip of the bit is coated with diamond particles to allow it to be used for engraving, carving and smoothing.
The diamond point can be used on:
Glass
Ceramic
Semi-precious stones
Metals
QTY: 1....
N$ 18.06
Ex VAT:N$ 15.70
Brand: TORK CRAFT
MPN: TC08335
Tungsten carbide cutter - Ø 3.2mm - Cylindrical
The tungsten carbide cutter has greater edge retention when compared to a steel cutter and can be used for material removal, shaping and smoothing
on hard materials.
The cutter can be used on the following materials:
Hardened and stainless steel
Cast iron
Non-ferrous metals
Fired ceramic
Wood
Plastic
QTY: 1
When shaping material, remove small amounts, instead of large chucks. This will increase the life of ..
N$ 35.36
Ex VAT:N$ 30.75
Brand: TORK CRAFT
MPN: TC08336
Tungsten carbide cutter - Ø 3.2mm - Cylindrical
The tungsten carbide cutter has greater edge retention when compared to a steel cutter and can be used for material removal, shaping and smoothing
on hard materials.
The cutter can be used on the following materials:
Hardened and stainless steel
Cast iron
Non-ferrous metals
Fired ceramic
Wood
Plastic
QTY: 1
When shaping material, remove small amounts, instead of large chucks. This will increase the life of ..
N$ 35.36
Ex VAT:N$ 30.75
Brand: TORK CRAFT
MPN: TC08337
Tungsten carbide cutter - Ø 3.2mm - Cylindrical
The tungsten carbide cutter has greater edge retention when compared to a steel cutter and can be used for material removal, shaping and smoothing
on hard materials.
The cutter can be used on the following materials:
Hardened and stainless steel
Cast iron
Non-ferrous metals
Fired ceramic
Wood
Plastic
QTY: 1
When shaping material, remove small amounts, instead of large chucks. This will increase the life of ..
N$ 35.36
Ex VAT:N$ 30.75
Brand: TORK CRAFT
MPN: TC08338
Tungsten carbide cutter - Ø 3.2mm - Round point
The tungsten carbide cutter has greater edge retention when compared to a steel cutter and can be used for material removal, shaping and smoothing
on hard materials.
The cutter can be used on the following materials:
Hardened and stainless steel
Cast iron
Non-ferrous metals
Fired ceramic
Wood
Plastic
QTY: 1
When shaping material, remove small amounts, instead of large chucks. This will increase the life of ..
N$ 35.36
Ex VAT:N$ 30.75