Airbrush Spare Parts

AirCraft SG-A138-03 Nozzle – For SG-A138 Airbrush At a Glance: Replacement nozzle for the AirCraft SG-A138 airbrush—brings back smooth atomisation and consistent spray control. When an airbrush starts misbehaving, the nozzle is often the culprit. A worn, cracked or paint-blocked nozzle can cause spitting, pulsing, uneven spray patterns and sudden loss of control—especially when you’re trying to do smooth fades or clean coverage. The AirCraft SG-A138-03 nozzle is a replac..

AirCraft SG-A138-04 O-Ring Kit – For SG-A138 Airbrush At a Glance: Replacement seal kit for the SG-A138 airbrush—helps prevent leaks, stabilise pressure and keep spraying consistent. Airbrushes run on tiny tolerances and controlled airflow, so when an O-ring wears out the symptoms show up fast: air leaks, bubbling, inconsistent paint flow, spitting or a trigger that suddenly feels “off”. Even a small seal can have a big impact because it affects pressure stability and how smoothly ..

AirCraft SG-A138-2-3 Nozzle Kit – For SG-A138 Airbrush At a Glance: Nozzle kit for the SG-A138 airbrush—refreshes the nozzle area to restore clean atomisation and predictable spray control. If your airbrush is spitting, pulsing, or spraying in a patchy pattern, the nozzle area is the first place to suspect—because it’s where airflow and paint flow meet under tiny tolerances. A nozzle can be worn by use, damaged by a small knock, or compromised by dried paint and over-tightening, an..

AirCraft Nozzle 0.5mm For A178 Sandblaster/Etcher (SG A178-01) At a Glance: Precision 0.5mm nozzle for fine-detail blasting and etching with the AirCraft A178 mini sandblaster/etcher. Bring your A178 back to crisp, controlled performance with the AirCraft SG A178-01 0.5mm nozzle. This is the small-but-mighty wear part that shapes your blast stream—perfect for fine etching, delicate cleaning and detail surface prep where a tight pattern matters. Replace a worn or partially blocked nozzle to..

AirCraft Sand (Blasting Media) 150g For A178 Sandblaster/Etcher (SG A178-02) At a Glance: 150g fine blasting media designed for smooth, controlled performance in the AirCraft A178 Sandblaster/Etcher. This is the fuel that makes your A178 sing. AirCraft SG A178-02 is a 150g pack of fine blasting media made for the A178 Sandblaster/Etcher (air eraser style tool). It’s ideal for precision cleaning, light surface preparation and detailed etching where you want control rather than chaos. Top up..

AirCraft O-Ring Repair Kit For SG A178 (Parts 2, 12 & 14) (SG A178-04) At a Glance: Replacement O-ring seal kit for SG A178—fixes leaks and restores consistent air/media flow. Small seals, big impact. The AirCraft SG A178-04 O-ring repair kit is the go-to refresh pack for your SG A178 sandblaster/etcher (air eraser style tool), replacing the key O-rings referenced as parts 2, 12 and 14. When O-rings harden, flatten or tear, you get the classic symptoms—hissing leaks, inconsistent blasting,..

AirCraft Nozzle For A180 Airbrush 0.25mm (SG A180-03) At a Glance: Precision 0.25mm replacement nozzle for the SG A180—brings back crisp detail lines and smooth spray control. Your airbrush can only be as good as its nozzle. The AirCraft SG A180-03 is the 0.25mm replacement nozzle for the SG A180 airbrush, designed to restore the fine, controlled spray pattern that makes detail work look effortless. Nozzles are wear parts—over time they can clog, deform, or suffer tiny damage from cleaning..

AirCraft O-Ring Repair Kit For SG A180 (Parts 4, 6, 7, 12, 25, 28, 35 & 37) (SG A180-04) At a Glance: Replacement O-ring seal kit for SG A180—fixes air leaks, improves control and keeps your spray consistent. If an airbrush starts acting “moody” — inconsistent spray, tiny air leaks, paint pulsing or a trigger that doesn’t feel right — worn seals are often the hidden culprit. The AirCraft SG A180-04 O-ring repair kit refreshes key sealing points in the SG A180 airbrush, replacing the O-ring..

AirCraft Nozzle Kit For A180 Airbrush 0.25mm (SG A180-1-2) At a Glance: Complete 0.25mm nozzle kit for the SG A180—ideal for restoring fine-line control and smooth spray performance. When a simple clean-up isn’t enough, a nozzle kit is the fastest way to bring an airbrush back from “spitty” to silky. The AirCraft SG A180-1-2 Nozzle Kit (0.25mm) is designed for the SG A180 airbrush and replaces the core nozzle components responsible for atomisation and flow. It’s perfect for fixing inconsis..

AirCraft Nozzle For A182 Airbrush 0.5mm (SG A182-03) At a Glance: 0.5mm replacement nozzle for the SG A182—great for higher-flow spraying and smoother coverage on small to medium jobs. When you want more flow, faster coverage and fewer clogs, the nozzle is the star of the show. The AirCraft SG A182-03 is the 0.5mm replacement nozzle for the SG A182 airbrush—designed to restore clean atomisation and steady paint delivery when the original nozzle is worn, damaged or stubbornly blocked. A 0.5..

AirCraft Nozzle Kit For A182 Airbrush 0.5mm (SG A182-1-2-3) At a Glance: Complete 0.5mm nozzle kit for the SG A182—ideal for restoring smooth, higher-flow spraying and consistent coverage. When cleaning stops working and your airbrush starts spitting, pulsing or refusing to spray evenly, the nozzle assembly is usually the culprit. The AirCraft SG A182-1-2-3 Nozzle Kit (0.5mm) is designed for the SG A182 airbrush and replaces the core nozzle components that control atomisation and paint flo..