Spray Finishing

AirCraft O-ring for AS1001P Spray Gun SG AS1001P-43) At a Glance: Replacement sealing O-ring to prevent leaks and keep pressure stable A spray gun is only as good as its seals. The AirCraft SG AS1001P-43 O-ring is a replacement sealing ring for compatible AirCraft AS1001P spray guns, designed to help prevent air or paint leaks where components join. When an O-ring hardens, swells, or gets nicked, you can end up with messy seepage, inconsistent spray, and wasted material. Replacing the seal..

AirCraft Spray Gun Touch-Up 0.5mm Nozzle At a Glance; Fine-detail touch-up spray gun with 0.5mm nozzle for small repairs and precision finishing When a full-size spray gun is simply too much, a touch-up gun gives you the control to do the job neatly—without flooding the surface. The AirCraft SG H2000 Touch-Up Spray Gun is designed for precision work, using a 0.5mm nozzle to deliver controlled, fine atomisation for spot repairs, edging, small parts, and detailed finishing. It’s a solid choi..

AirCraft Nozzle Gasket for SG H2000 Spray Gun (SG H2000-03) At a Glance: Replacement sealing gasket to stop air leaks at the nozzle assembly The AirCraft SG H2000-03 Nozzle Gasket is a small but essential spare part that helps your SG H2000 spray gun perform at its best. This gasket sits in the nozzle/air cap area and provides a proper seal so air pressure goes where it should—through the gun’s passages—rather than leaking out at the nozzle assembly. If you’re noticing inconsistent atomisa..

AirCraft Spare Nozzle Kit 0.5mm SG H2000-1 For SG H2000 At a Glance: 3-piece 0.5mm nozzle set (needle, nozzle and air cap) to refresh your SG H2000 for clean, fine-detail spraying. The AirCraft SG H2000-1 Spare Nozzle Kit 0.5mm is a replacement nozzle set for the AirCraft SG H2000 airbrush/spray gun. This kit includes the core wear parts that control spray quality: the needle, the fluid nozzle, and the air cap. Over time these parts can wear, get scratched, or become clogged wit..

AirCraft Trigger Pin SG H2000-12 For H2000 Spray Gun At a Glance: Replacement trigger pivot pin for the AirCraft H2000—keeps the trigger aligned and moving smoothly. The AirCraft SG H2000-12 Trigger Pin is a small but essential spare part for the AirCraft H2000 spray gun. This pin acts as the pivot/retaining pin for the trigger mechanism, helping keep the trigger aligned and allowing smooth movement during spraying. If your trigger feels loose, misaligned, sticky, or the o..

THATCHING CIRCLE FOR H2000 SPRAY GUN....

AirCraft Thatching Circle (Retaining Clip) SG-H2000-13 For H2000 Spray Gun At a Glance: Small E-clip style retaining circlip that locks a pin/shaft in place on the AirCraft H2000 spray gun. The AirCraft SG-H2000-13 Thatching Circle is a small but critical retaining clip for the AirCraft H2000 spray gun. Despite the quirky name, what you’re looking at is essentially a circlip / E-clip style retaining ring—the part that snaps onto a shaft or pin to stop it from sliding out during ..

AirCraft Spare Nozzle Kit 0.8mm SG H2000-2 For H2000 At a Glance: 3-piece 0.8mm nozzle set (needle, nozzle and air cap) to refresh your H2000 for clean, dependable spraying. The AirCraft SG H2000-2 Spare Nozzle Kit 0.8mm is a replacement nozzle set for the AirCraft H2000 spray gun/airbrush. This kit includes the essential wear components that control spray quality: the needle, the fluid nozzle, and the air cap. When these parts get worn, damaged, or clogged, you’ll see it immedi..

SMALL GASKET FOR SG H2000-26....