General
Brand: AIRCRAFT
MPN: SG AD04
Air Duster/Blow GunLong Nozzle
Air Inlet: 1/4"M BSP
Nozzle diameter: 4.0mm
Nozzle length: 260mm
Working pressure: 0-10Bar/0-150PSI
Air dusters and blow guns are tools used to remove dust, debris, and moisture from various surfaces and equipment.
They work by utilizing compressed air to create a forceful stream of air that dislodges particles and dries
surfaces.
Application:
To be used with compressed air
For dust removal from work pieces/work areas
Gene..
N$ 136.85
Ex VAT:N$ 119.00
Brand: AIRCRAFT
MPN: SG AD05
Mini Air Duster/Blow Gun
Air Inlet: 1/4"M BSP
Air consumption rate: 6 CFM (170l/min)
Output increase rate: 12CFM (340/min)
Working pressure: 0-10Bar/0-150PSI
Connector Type: ARO
Air dusters and blow guns are tools used to remove dust, debris, and moisture from various surfaces and equipment.
They work by utilizing compressed air to create a forceful stream of air that dislodges particles and dries
surfaces.
Application:
To be used with compressed air
Fo..
N$ 148.35
Ex VAT:N$ 129.00
Brand: AIRCRAFT
MPN: SG ATC-09
AirCraft Tyre Chuck 8mm Hose (SG ATC 09)
At a Glance: Clip-on lever tyre chuck for fast tyre inflation from an 8 mm air hose
The AirCraft SG ATC 09 Tyre Chuck for 8mm hose is a tough, workshop-ready connector that makes tyre inflation quicker, cleaner, and far less fiddly. Its brass body and lever-style clamp allow it to clip firmly onto a standard tyre valve and hold securely while you inflate—ideal for hands-free use and reduced air loss. Designed to suit an 8 mm air hose connection, it’..
N$ 55.37
Ex VAT:N$ 48.15
Brand: AIRCRAFT
MPN: SG DTC-12
Heavy duty tyre chuck
The heavy duty dual head tyre chuck is fitted with a rubber grip and is ideal
to inflate tyres in hard to reach places.
Hose tail for Ø 8mm ID hose....
N$ 87.75
Ex VAT:N$ 76.30
Brand: AIRCRAFT
MPN: SG PTFE12-2P
AirCraft PTFE Tape 12mm x 0.075mm x 10m Roll 2 Piece Pack (SG PTFE12-2P)
At a Glance: 2-roll PTFE thread seal tape pack—12mm wide, 0.075mm thick, 10m per roll for leak-resistant threaded joints.
A tiny leak in a threaded joint can waste air, drop pressure, and turn a neat install into a noisy, hissing annoyance. The AirCraft SG PTFE12-2P PTFE Tape is the simple, reliable fix: wrap it on the thread, tighten the fitting, and get a cleaner seal.
Supplied as a 2-piece pack, each roll is 12mm ..
N$ 62.10
Ex VAT:N$ 54.00
Brand: AIRCRAFT
MPN: SG S510M
Tyre pressure gauge - Pencil type
The pressure gauge is easy to use, fit it on the valve and the gauge pops out the back indicating the pressure.
It's referred to as a pencil type pressure gauge, because it resembles a pencil and even has a clip to carry and store easily.....
N$ 62.10
Ex VAT:N$ 54.00
Brand: AIRCRAFT
MPN: SG SS-28
Tyre chuck 1/4 BSP
The tyre chuck needs to be pressed onto a tyre's valve to inflate it.
Combine the tyre chuck with a hose tail fitting, fitted to a hose to inflate a tyre.....
N$ 37.49
Ex VAT:N$ 32.60
Brand: AIRCRAFT
MPN: SG STG05
Tyre inflator with pressure gauge
The tyre chuck on the pressure gauge conveniently holds the valve in place while inflating the tyre.
A button can be pressed on the inflator gun to deflate the tyre in the pressure is too high.
Working pressure: 0-10 Bar....
N$ 330.80
Ex VAT:N$ 287.65
Brand: AIRCRAFT
MPN: SG WG01
AirCraft Wash / Paraffin Gun Bulk (SG WG01) [BULK]
At a Glance: 750ml cup • Adjustable 2.0mm nozzle • 1/4" BSP Male air inlet • 0–15 bar working pressure
Meet the workshop clean-up hero that doesn’t mess around. The AirCraft SG WG01 Wash / Paraffin Gun is built to spray cleaning liquids with control and consistency—whether you need a gentle rinse or a heavier mist to lift stubborn grime. With a generous 750ml cup and an adjustable 2.0mm nozzle, it’s ideal for engines, equipment, tools, gener..
N$ 182.85
Ex VAT:N$ 159.00
Brand: AIRCRAFT
MPN: SG ATC-09P
AirCraft Tyre Chuck 8mm Hose (SG ATC 09P) (Carded Packaging)
At a Glance: Clip-on lever tyre chuck for fast tyre inflation from an 8 mm air hose
The AirCraft SG ATC 09P Tyre Chuck for 8mm hose is a tough, workshop-ready connector that makes tyre inflation quicker, cleaner, and far less fiddly. Its brass body and lever-style clamp allow it to clip firmly onto a standard tyre valve and hold securely while you inflate—ideal for hands-free use and reduced air loss. Designed to suit an 8 mm air..
N$ 62.56
Ex VAT:N$ 54.40
