Spray Finishing

Nozzle kit for HVL Spray gun High Volume Low Pressure 2,0mm   This nozzle kit is designed for the Record range of spray guns in HVLP. It consumes approximately 350 to 450 l/min of air. Made in Italy     2,0mm nozzle size  ....

NOZZLE KIT FOR RECORD 1.5MM....

NOZZLE KIT FOR RECORD 2.0MM....

NOZZLE KIT FOR RECORD 2.5MM....

AirCraft Nozzle & Needle Kit 0.5mm For LM3000M (SG-LM3000M-3) At a Glance: 0.5mm nozzle and needle kit for ultra-fine control and crisp atomisation on the LM3000M spray gun When you need maximum control and the finest possible spray delivery, the nozzle and needle set is where the magic (and the precision) lives. The AirCraft SG-LM3000M-3 Nozzle & Needle Kit (0.5mm) is a matched replacement set for the LM3000M spray gun, designed to restore tight, consistent atomisation and reliable ..

AirCraft Nozzle / Needle Kit 1.4mm For AB17G (SG AB17G-1) At a Glance: 1.4mm nozzle and needle kit for the AB17G—ideal for restoring clean atomisation and consistent spray control. When a spray gun starts spitting, pulsing, or laying down a patchy pattern, the nozzle and needle pair are usually where the story begins. The AirCraft SG AB17G-1 Nozzle/Needle Kit (1.4mm) is designed for the AB17G spray gun and replaces the core components that control fluid flow and atomisation. A fresh matche..

AirCraft Nozzle / Needle Kit 1.7mm For AB17G (SG AB17G-2) At a Glance: 1.7mm nozzle and needle kit for the AB17G—higher flow for thicker coatings and faster, smoother coverage. When you need more material flow for heavier coatings, a larger nozzle/needle set makes all the difference. The AirCraft SG AB17G-2 Nozzle/Needle Kit (1.7mm) is designed for the AB17G spray gun and replaces the matched components that control fluid delivery and atomisation. It’s ideal for servicing a worn set or set..

AirCraft Nozzle & Needle Set 0.8mm For LM3000M (SG-LM3000M-2) At a Glance: 0.8mm nozzle and needle replacement set for finer control and crisp atomisation on the LM3000M spray gun If you’re chasing a cleaner, tighter finish and better control at lower flow rates, nozzle size matters. The AirCraft SG-LM3000M-2 Nozzle & Needle Set (0.8mm) is a matched replacement set for the LM3000M spray gun, designed to restore smooth atomisation, consistent flow, and reliable sealing. A 0.8mm setup ..

AirCraft Nozzle & Needle Set 1.0mm For LM3000M (SG-LM3000M-1) At a Glance: 1.0mm nozzle and needle replacement set to restore spray performance on the LM3000M spray gun The nozzle and needle are the “precision heart” of any spray gun—when they’re worn, bent, or damaged, the gun can start to spit, pulse, leak, or lose that clean, even fan you’re chasing. The AirCraft SG-LM3000M-1 Nozzle & Needle Set (1.0mm) is a matched replacement set for the LM3000M, designed to bring back smooth at..

AirCraft Air Cap Nut For AB17G Spray Gun (SG AB17G-14) At a Glance: Replacement knurled retaining nut for the AB17G—secures key spray gun components for stable, consistent spraying. Sometimes the smallest hardware causes the biggest headaches. The AirCraft SG AB17G-14 Nut is a replacement retaining nut designed for the AB17G spray gun, used to secure and hold key front-end components firmly in place. If a nut is damaged, cross-threaded, missing, or no longer tightening correctly, you can e..