Power Tools
Brand: AIRCRAFT
MPN: STAP005
21-Gauge Staples — 12 mm (Box of 5 000)
These 21-gauge staples with 12 mm leg length (supplied in a 5 000 count pack) are ideal for light interior applications such
as panel backing, trim, upholstery and soft wood fixings. They provide sufficient bite into substrates while keeping a low profile for clean
finishing. The product code is STAP005.....
N$ 109.25
Ex VAT:N$ 95.00
Brand: AIRCRAFT
MPN: STAP006
21-Gauge Staples — 14 mm (Box of 5 000)
These 21-gauge staples, with 14 mm leg length and supplied in a box of 5 000, are perfect for moderate penetration tasks in
wood, panel backing, trim, upholstery and light interior applications. The fine wire gauge and sufficient leg length make them useful when you want
secure fastening without heavy intrusion.....
N$ 120.75
Ex VAT:N$ 105.00
Brand: FESTOOL
MPN: FES575077
Festool Compressed air eccentric sander LEX 3 150/7
Order number: FES575077
Model: LEX 3 150/7 ....
N$ 22,676.39
Ex VAT:N$ 19,718.60
Brand: FESTOOL
MPN: FES575081
Festool Compressed air eccentric sander LEX 3 150/5
Order number: FES575081
Model: LEX 3 150/5 ....
N$ 23,609.50
Ex VAT:N$ 20,530.00
Brand: FESTOOL
MPN: FES691131
Festool Compressed air eccentric sander LEX 3 77/2,5
Order number: FES691131
Model: LEX 3 77/2,5 ....
N$ 14,780.00
Ex VAT:N$ 12,852.17
Brand: FESTOOL
MPN: FES691139
Strengths and benefitsLow compressed air consumption ensures high cost savingsLow vibration levels and a pleasant operating noise protect the user's healthSimplifies permanent dust extraction, guarantees the best working results and protects the user's health when combined with the IAS 3 light hoseSanding pad brake reduces sanding errors when setting down the machine, thereby avoiding rework and additional costsHigh-quality FUSION-TEC sanding pad with MULTI-Jetstream principle ensures ..
N$ 15,394.92
Ex VAT:N$ 13,386.89
Brand: AIRCRAFT
MPN: AT0018-02
AirCraft Outer Sleeve for Air Hydraulic Riveter (AT0018-02)
At a Glance: Replacement outer sleeve assembly for AirCraft air hydraulic riveters—supports the front-end mechanism for smooth, controlled riveting.
The AirCraft AT0018-02 Outer Sleeve is a key front-end component for an AirCraft Air Hydraulic Riveter. This sleeve forms part of the nose/front assembly, helping keep internal parts aligned and protected while the tool applies pulling force on rivet mandrels.
If your rivet..
N$ 386.00
Ex VAT:N$ 335.65
Brand: AIRCRAFT
MPN: AT0018-04
AirCraft Jaw Assembly 3 Piece for Air Hydraulic Riveter (AT0018-04)
At a Glance: 3-piece replacement jaw set for AirCraft air hydraulic riveters—grips the mandrel securely for consistent pulling power and clean rivet setting.
The AirCraft AT0018-04 Jaw Assembly is a 3-piece jaw set that forms the gripping heart of an Air Hydraulic Riveter. These jaws bite onto the rivet mandrel and pull it with controlled force to set the rivet properly. Over time, jaw teeth wear, jaws glaze, and gri..
N$ 257.89
Ex VAT:N$ 224.25
Brand: AIRCRAFT
MPN: AT0018-24
AirCraft Air Cylinder Cover for Air Hydraulic Riveter (AT0018-24)
At a Glance: Replacement air cylinder cover components for AirCraft air hydraulic riveters—supports sealing and smooth cycling for consistent riveting performance.
The AirCraft AT0018-24 Air Cylinder Cover is a critical service part for the air cylinder section of an AirCraft Air Hydraulic Riveter. The cylinder cover forms part of the air motor/cylinder assembly, helping to locate internal components, support sealing s..
N$ 417.62
Ex VAT:N$ 363.15
Brand: AIRCRAFT
MPN: AT0018-C02
AirCraft Wrench for Air Hydraulic Riveter (AT0018-C02)
At a Glance: Service wrench for AirCraft air hydraulic riveters—designed to fit riveter fittings and nose components for quick, secure maintenance.
The AirCraft AT0018-C02 Wrench is the correct tool to keep your Air Hydraulic Riveter properly serviced and ready for work. It’s designed to suit key fittings and nose/front-end components, making it easier to tighten, loosen, and maintain parts without slipping, rounding, or damaging..
N$ 33.98
Ex VAT:N$ 29.55
Brand: AIRCRAFT
MPN: AT0018-C03
AirCraft Wrench for Air Hydraulic Riveter (AT0018-C03)
At a Glance: Service wrench/spanner for AirCraft air hydraulic riveters—made for loosening and tightening riveter front-end and fitting components with a proper fit.
The AirCraft AT0018-C03 Wrench is a dedicated service spanner for maintaining an AirCraft Air Hydraulic Riveter. It’s designed to fit specific riveter fittings and front-end parts so you can tighten and loosen components cleanly—without slipping, rounding edges, or i..
N$ 33.98
Ex VAT:N$ 29.55
Brand: AIRCRAFT
MPN: AT0026-10
AirCraft Rotor Blade (x5) For Air Palm Sander AT0026 (AT0026-10)
At a Glance: Pack of 5 replacement rotor blades (vanes) to restore power and smooth running on the AirCraft AT0026 air palm sander.
Your air palm sander’s motor relies on rotor blades (also called vanes) to convert compressed air into consistent torque. Over time, blades wear down, lose their seal inside the rotor, and the tool starts to feel weak, uneven or slow to spin up. The AirCraft AT0026-10 Rotor Blade Set (x5) is a di..
N$ 13.69
Ex VAT:N$ 11.90