Grinder

AirCraft Front Plate for Air Die Grinder 6mm Mini (AT0017-27) At a Glance: Replacement front plate for the AirCraft AT0017 6mm Mini Air Die Grinder—supports internal motor alignment and stable high-speed rotation. The AirCraft AT0017-27 Front Plate is a precision internal component used in the pneumatic motor assembly of the AT0017 6mm Mini Air Die Grinder. Together with the cylinder, rotor, and rear plate, the front plate helps define correct spacing and support so the motor can spi..

AirCraft Governors For The AT0013 Air Angle Grinder 125mm Proline (AT0013-41) At a Glance: Replacement governor assembly that helps control and stabilise running speed on the AT0013 Proline pneumatic grinder. A pneumatic grinder that over-speeds or runs inconsistently isn’t just annoying—it can be unsafe and hard on consumables. The AirCraft AT0013-41 Governors is a replacement governor assembly for the AirCraft AT0013 125mm Proline air angle grinder. The governor plays a critical role in regu..

AirCraft Main Housing for Air Die Grinder 6mm Mini (AT0017-18) At a Glance: Replacement outer body (main housing) for the AirCraft AT0017 6mm Mini Air Die Grinder—restores structural protection and correct component seating. The AirCraft AT0017-18 Main Housing is the primary body shell of the AT0017 6mm Mini Air Die Grinder—the part you hold, and the part that keeps everything inside properly aligned and protected. If the original housing is cracked, dented, worn, or damaged from a f..

AirCraft Metal Guard For AT0013 Air Angle Grinder 125mm Proline (AT0013-16) At a Glance: Replacement 125mm metal safety guard that helps direct sparks and debris away from you while grinding or cutting. The guard is not “optional plastic”—it’s the part that stands between you and a bad day. The AirCraft AT0013-16 Metal Guard is a replacement safety guard for the AirCraft AT0013 125mm Proline air angle grinder. Designed to wrap around the wheel area, it helps deflect sparks, grinding dust and d..

AirCraft Muffler For AT0013 Air Angle Grinder 125mm Proline (AT0013-03) At a Glance: Replacement exhaust muffler plate that helps quieten the AT0013 Proline grinder and smooth out exhaust airflow. Air tools are brilliant—right up until the exhaust starts screaming like an angry kettle. The AirCraft AT0013-03 Muffler is a replacement muffler/exhaust plate for the AirCraft AT0013 125mm Proline air angle grinder. It helps reduce exhaust noise by diffusing the outgoing air stream, while keeping ex..

Tork Craft Nut & Flange Kit (1-2 / 4-5) Service Kit (TCCS0185-SK01) At a Glance: Retaining nut and flange set (parts 1–2 and 4–5) for secure disc mounting on the Tork Craft TCCS0185 cut-off saw On a cut-off saw, the nut and flange set is what keeps the cutting disc centred, clamped and stable at speed. If the flanges are worn, the nut is damaged, or the faces no longer clamp smoothly, you can end up with disc wobble, vibration, uneven cuts and unsafe retention. The Tork Craft TCCS0185-SK01..

O-RING FOR AIR DIE GRINDER 1/4'....

O-RING FOR AIR DIE GRINDER 1/4'....

O-RING FOR AIR DIE GRINDER 1/4'....

O-RING FOR AIR DIE GRINDER 1/4'....

AirCraft Rear Plate for Air Die Grinder 6mm Mini (AT0017-20) At a Glance: Replacement rear plate for the AirCraft AT0017 6mm Mini Air Die Grinder—supports internal motor assembly alignment and stability. The AirCraft AT0017-20 Rear Plate is a key internal structural component in the AT0017 6mm Mini Air Die Grinder. Inside a pneumatic die grinder, the motor assembly relies on properly machined plates to keep the rotor and related parts aligned, supported, and running smoothly at speed..

ROTOR BLADE FOR AIR DIE GRINDER 1/4'....