Spare Parts

Tork Craft Drill Pop Riveter Spare Noze Pieces 6.0mm For TCRIV003 (TCRIV003-05) At a Glance: Replacement 6.0mm nose piece for the Tork Craft TCRIV003 pop riveter. 6.0mm rivets are for jobs that want real holding power—thicker materials, higher loads, and less tolerance for sloppy alignment. That’s where the correct nose piece matters: it guides the rivet, supports a straight pull, and helps the jaws grip the mandrel properly until the snap. The Tork Craft TCRIV003-05 Drill Pop Riveter Spar..

Tork Craft Drill Pop Riveter Spare Noze Pieces 6.4mm For TCRIV003 (TCRIV003-06) At a Glance: Replacement 6.4mm nose piece for the Tork Craft TCRIV003 pop riveter. 6.4mm rivets are the heavyweight end of pop riveting—excellent holding power, but they demand the correct nose piece to keep the rivet centred and the mandrel pull straight. A worn, burred, damaged or missing tip can cause slipping, skewed rivets and inconsistent sets (and a rapidly shrinking rivet supply). The Tork Craft TCRIV00..

Tork Craft Drill Pop Spare Mandrell For TCRIV003 (TCRIV003-006) At a Glance: Replacement spare mandrell for the Tork Craft TCRIV003 pop riveter. Pop riveting is meant to be quick and satisfying: squeeze, set, snap—done. When the mandrell is worn, bent, or damaged, the tool can start slipping, setting inconsistently, or refusing to pull the rivet properly. The Tork Craft TCRIV003-006 Drill Pop Spare Mandrell is a replacement mandrell component for the TCRIV003 pop riveter, helping restore s..

Festool Long-life chip collection bag SB-Longlife RTS/DTS/ETS Order number: FES201693 Model: SB-Longlife RTS/DTS/ETS ....

Tork Craft Gear & Bearing Complete Set (2–12) For POL06-2G At a Glance: Complete gear and bearing set for the Tork Craft POL06-2G polisher gearbox The Tork Craft gear and bearing complete set (Cat No. POL06-2G-SK09) is a genuine service kit for the Tork Craft POL06-2G 1500W 180mm polisher. Hard-working polishers put serious load on their gearboxes – over time, gears and bearings can wear, become noisy or develop play, which affects control and finish quality. This kit rep..

Tork Craft Gearbox Housing & Screws (13/14) For POL06-2G At a Glance: Genuine gearbox housing and screw kit for the Tork Craft POL06-2G polisher The Tork Craft gearbox housing and screws kit (Cat No. POL06-2G-SK08) is a genuine spare set designed specifically for the Tork Craft POL06-2G 1500W 180mm polisher. The gearbox housing forms the front section of the tool, enclosing the gears and supporting the spindle while the screws clamp everything securely in place. If the or..

Tork Craft Housing Complete Set (12/19/31/33–36/45/46) For POL06-2G At a Glance: Genuine replacement housing set for the Tork Craft POL06-2G polisher The Tork Craft housing complete set (Cat No. POL06-2G-SK06) is a genuine spare designed specifically for the Tork Craft POL06-2G 1500W 180mm polisher. Daily use, accidental drops or harsh site conditions can leave the housing cracked, worn or badly scuffed. This kit replaces the main body components listed as positions 12, 1..

Tork Craft Polisher Split Washer For POL05 At a Glance; Locking split washer for securing key fasteners on the Tork Craft POL05 polisher. The small parts often do the biggest jobs. The Tork Craft POL05-17 split washer is a compact locking washer used in the POL05 polisher to help keep important screws or nuts tight under vibration and load. Fitted in the correct position, it provides extra spring tension against the fastener head, reducing the chance of things working loose while you are c..

Tork Craft Polisher Bearing 6000 For POL04 At a Glance; Genuine 6000 series bearing for the Tork Craft POL04 polisher motor and drive assembly. Keep your Tork Craft POL04 polisher feeling tight, smooth and professional with this dedicated POL04-29 6000 bearing spare. Motor and drive bearings carry the rotating armature or spindle, helping the machine spin freely with minimal friction and vibration. Once a bearing starts to wear, the polisher can quickly become noisy, harsh and less accur..

Tork Craft Polisher Bearing 6001 For POL05 At a Glance; Standard 6001 deep groove bearing for key support points in the Tork Craft POL05 polisher. Keep your Tork Craft POL05 running smooth, quiet and controlled with this genuine 6001 bearing. The POL05-22 bearing is used at a critical support point in the motor or gearbox, helping to keep the rotating shaft aligned so the backing pad runs true and the tool feels solid in your hands. As a bearing wears, you will hear more noise, feel e..

Tork Craft Polisher Bearing 607 For POL04 At a Glance; Genuine 607 series bearing for the Tork Craft POL04 rotary polisher. Keep your Tork Craft POL04 polisher running smooth and precise with this dedicated POL04-33 bearing spare. The 607 bearing supports rotating parts in the motor or drive assembly, helping the spindle turn freely with minimal friction, noise and vibration – essential for a consistent polishing finish. As bearings wear, they can develop play, rough spots and extra n..