Sanders / Polishers

Tork Craft Spindle Lock Comp (14–18) For POL06-2G At a Glance: Complete genuine spindle lock assembly for the Tork Craft POL06-2G polisher The Tork Craft spindle lock complete assembly (Cat No. POL06-2G-SK07) is a genuine spare designed specifically for the Tork Craft POL06-2G 1500W 180mm polisher. The spindle lock is the mechanism that safely holds the spindle still while you change backing pads, bonnets or accessories. If any part of this mechanism is worn, damaged or m..

Tork Craft Gearbox Housing & Screws (13/14) For POL06-2G At a Glance: Genuine gearbox housing and screw kit for the Tork Craft POL06-2G polisher The Tork Craft gearbox housing and screws kit (Cat No. POL06-2G-SK08) is a genuine spare set designed specifically for the Tork Craft POL06-2G 1500W 180mm polisher. The gearbox housing forms the front section of the tool, enclosing the gears and supporting the spindle while the screws clamp everything securely in place. If the or..

Tork Craft Gear & Bearing Complete Set (2–12) For POL06-2G At a Glance: Complete gear and bearing set for the Tork Craft POL06-2G polisher gearbox The Tork Craft gear and bearing complete set (Cat No. POL06-2G-SK09) is a genuine service kit for the Tork Craft POL06-2G 1500W 180mm polisher. Hard-working polishers put serious load on their gearboxes – over time, gears and bearings can wear, become noisy or develop play, which affects control and finish quality. This kit rep..

Tork Craft Armature Front Bearing & Screws (10–23) For POL06-2G At a Glance: Genuine armature front bearing and screws kit for the Tork Craft POL06-2G polisher The Tork Craft armature front bearing and screws kit (Cat No. POL06-2G-SK10) is a genuine service part for the Tork Craft POL06-2G 1500W 180mm polisher. The front bearing supports the nose of the armature, while the matching screws keep the bearing securely clamped in position. When the bearing wears or the fastene..

Tork Craft Armature (24) For POL06-2G At a Glance: Genuine replacement motor armature for the Tork Craft POL06-2G 1500W 180mm polisher The Tork Craft armature (Cat No. POL06-2G-SK11) is a genuine replacement motor armature designed specifically for the Tork Craft POL06-2G 1500W 180mm polisher. The armature is the rotating core of the motor – once it becomes burnt, shorted, mechanically damaged or badly worn, the machine can lose power, spark excessively, overheat or fail ..

Tork Craft Side Handle (20) For POL06-2G At a Glance: Original side handle for the Tork Craft POL06-2G 1500 W 180 mm polisher The Tork Craft side handle (Cat No. POL06-2G-SK12) is the genuine replacement auxiliary handle for the Tork Craft POL06-2G 1500 W 180 mm polisher. A solid, comfortable side handle is essential for keeping a firm grip on a high-power polisher, especially when working on curved panels or awkward areas. If the original handle has gone missing, cracked..

Tork Craft Capacitance & Cable Complete Set (33/41–44) For POL06-2G At a Glance: Genuine capacitor and cable set for the Tork Craft POL06-2G polisher The Tork Craft capacitance and cable complete set (Cat No. POL06-2G-SK13) is a genuine replacement kit for the Tork Craft POL06-2G 1500 W 180 mm polisher. This set includes the key electrical components in positions 33 and 41–44, typically covering the power cable, strain relief, connector hardware and capacitor assembly. With time, cab..

Tork Craft Drill Pop Spare Mandrell For TCRIV003 (TCRIV003-006) At a Glance: Replacement spare mandrell for the Tork Craft TCRIV003 pop riveter. Pop riveting is meant to be quick and satisfying: squeeze, set, snap—done. When the mandrell is worn, bent, or damaged, the tool can start slipping, setting inconsistently, or refusing to pull the rivet properly. The Tork Craft TCRIV003-006 Drill Pop Spare Mandrell is a replacement mandrell component for the TCRIV003 pop riveter, helping restore s..

Tork Craft Drill Pop Riveter Spare Noze Pieces 2.4mm For TCRIV003 (TCRIV003-01) At a Glance: Replacement 2.4mm nose piece for the Tork Craft TCRIV003 pop riveter. A pop riveter is only as good as the nose piece guiding the rivet and mandrel. If the tip is worn, burred, damaged or missing, rivets can sit skew, slip, or set inconsistently—turning a quick job into a comedy of errors. The Tork Craft TCRIV003-01 Drill Pop Riveter Spare Noze Piece (2.4mm) is a replacement nose piece designed for..

Tork Craft Drill Pop Riveter Spare Noze Pieces 3.2mm For TCRIV003 (TCRIV003-02) At a Glance: Replacement 3.2mm nose piece for the Tork Craft TCRIV003 pop riveter. The nose piece is the riveter’s “aiming and guiding” component—keeping the rivet centred and the mandrel aligned so the pull is smooth and the set is solid. When the tip is worn, burred, damaged or missing, rivets can slip, sit skew, or set inconsistently. The Tork Craft TCRIV003-02 Drill Pop Riveter Spare Noze Piece (3.2mm) is a..

Tork Craft Drill Pop Riveter Spare Noze Pieces 4.0mm For TCRIV003 (TCRIV003-03) At a Glance: Replacement 4.0mm nose piece for the Tork Craft TCRIV003 pop riveter. When you move up to 4.0mm rivets, the nose piece becomes even more important—alignment and correct fitment are what stop slippage and ensure the mandrel pulls cleanly until it snaps. If the tip is worn, burred, damaged or missing, rivets can skew, slip, or set inconsistently. The Tork Craft TCRIV003-03 Drill Pop Riveter Spare Noz..

Tork Craft Drill Pop Riveter Spare Noze Pieces 4.8mm For TCRIV003 (TCRIV003-04) At a Glance: Replacement 4.8mm nose piece for the Tork Craft TCRIV003 pop riveter. 4.8mm rivets are the “big lads” in pop riveting—great holding power, but they demand the right nose piece to keep everything aligned and pulling smoothly. A worn, burred, damaged or missing tip can cause rivets to sit skew, slip during the pull, or set inconsistently. The Tork Craft TCRIV003-04 Drill Pop Riveter Spare Noze Piece ..