Spare Parts

Tork Craft Side Handle (20) For POL06-2G At a Glance: Original side handle for the Tork Craft POL06-2G 1500 W 180 mm polisher The Tork Craft side handle (Cat No. POL06-2G-SK12) is the genuine replacement auxiliary handle for the Tork Craft POL06-2G 1500 W 180 mm polisher. A solid, comfortable side handle is essential for keeping a firm grip on a high-power polisher, especially when working on curved panels or awkward areas. If the original handle has gone missing, cracked..

Tork Craft Capacitance & Cable Complete Set (33/41–44) For POL06-2G At a Glance: Genuine capacitor and cable set for the Tork Craft POL06-2G polisher The Tork Craft capacitance and cable complete set (Cat No. POL06-2G-SK13) is a genuine replacement kit for the Tork Craft POL06-2G 1500 W 180 mm polisher. This set includes the key electrical components in positions 33 and 41–44, typically covering the power cable, strain relief, connector hardware and capacitor assembly. With time, cab..

Tork Craft Drill Pop Spare Mandrell For TCRIV003 (TCRIV003-006) At a Glance: Replacement spare mandrell for the Tork Craft TCRIV003 pop riveter. Pop riveting is meant to be quick and satisfying: squeeze, set, snap—done. When the mandrell is worn, bent, or damaged, the tool can start slipping, setting inconsistently, or refusing to pull the rivet properly. The Tork Craft TCRIV003-006 Drill Pop Spare Mandrell is a replacement mandrell component for the TCRIV003 pop riveter, helping restore s..

Tork Craft Drill Pop Riveter Spare Noze Pieces 2.4mm For TCRIV003 (TCRIV003-01) At a Glance: Replacement 2.4mm nose piece for the Tork Craft TCRIV003 pop riveter. A pop riveter is only as good as the nose piece guiding the rivet and mandrel. If the tip is worn, burred, damaged or missing, rivets can sit skew, slip, or set inconsistently—turning a quick job into a comedy of errors. The Tork Craft TCRIV003-01 Drill Pop Riveter Spare Noze Piece (2.4mm) is a replacement nose piece designed for..

Tork Craft Drill Pop Riveter Spare Noze Pieces 3.2mm For TCRIV003 (TCRIV003-02) At a Glance: Replacement 3.2mm nose piece for the Tork Craft TCRIV003 pop riveter. The nose piece is the riveter’s “aiming and guiding” component—keeping the rivet centred and the mandrel aligned so the pull is smooth and the set is solid. When the tip is worn, burred, damaged or missing, rivets can slip, sit skew, or set inconsistently. The Tork Craft TCRIV003-02 Drill Pop Riveter Spare Noze Piece (3.2mm) is a..

Tork Craft Drill Pop Riveter Spare Noze Pieces 4.0mm For TCRIV003 (TCRIV003-03) At a Glance: Replacement 4.0mm nose piece for the Tork Craft TCRIV003 pop riveter. When you move up to 4.0mm rivets, the nose piece becomes even more important—alignment and correct fitment are what stop slippage and ensure the mandrel pulls cleanly until it snaps. If the tip is worn, burred, damaged or missing, rivets can skew, slip, or set inconsistently. The Tork Craft TCRIV003-03 Drill Pop Riveter Spare Noz..

Tork Craft Drill Pop Riveter Spare Noze Pieces 4.8mm For TCRIV003 (TCRIV003-04) At a Glance: Replacement 4.8mm nose piece for the Tork Craft TCRIV003 pop riveter. 4.8mm rivets are the “big lads” in pop riveting—great holding power, but they demand the right nose piece to keep everything aligned and pulling smoothly. A worn, burred, damaged or missing tip can cause rivets to sit skew, slip during the pull, or set inconsistently. The Tork Craft TCRIV003-04 Drill Pop Riveter Spare Noze Piece ..

Tork Craft Drill Pop Riveter Spare Noze Pieces 6.0mm For TCRIV003 (TCRIV003-05) At a Glance: Replacement 6.0mm nose piece for the Tork Craft TCRIV003 pop riveter. 6.0mm rivets are for jobs that want real holding power—thicker materials, higher loads, and less tolerance for sloppy alignment. That’s where the correct nose piece matters: it guides the rivet, supports a straight pull, and helps the jaws grip the mandrel properly until the snap. The Tork Craft TCRIV003-05 Drill Pop Riveter Spar..

Tork Craft Drill Pop Riveter Spare Noze Pieces 6.4mm For TCRIV003 (TCRIV003-06) At a Glance: Replacement 6.4mm nose piece for the Tork Craft TCRIV003 pop riveter. 6.4mm rivets are the heavyweight end of pop riveting—excellent holding power, but they demand the correct nose piece to keep the rivet centred and the mandrel pull straight. A worn, burred, damaged or missing tip can cause slipping, skewed rivets and inconsistent sets (and a rapidly shrinking rivet supply). The Tork Craft TCRIV00..

Tork Craft Drill Pop Riveter Spare E-clip For TCRIV003 (TCRIV003-07) At a Glance: Replacement E-clip (retaining clip) spare part for the Tork Craft TCRIV003 pop riveter. The humble E-clip is one of those tiny parts that does a big job: it helps retain components on a shaft so the mechanism stays aligned and operates smoothly. If an E-clip pops off, bends, or goes missing, parts can shift, bind, or wear prematurely—sometimes turning a perfectly good riveter into a rattly paperweight. The To..