Saws
Brand: TORK CRAFT
MPN: TCCS0355-SK03
Tork Craft Support Bracket Compl. (2/4/12/20-28/30-38/89-90) For TCCS0355
At a Glance: Support bracket complete assembly (parts 2, 4, 12, 20–28, 30–38, 89–90) for the Tork Craft TCCS0355
When a cut-off saw starts feeling “loose”, misaligned, or inconsistent, the culprit is often the supporting bracketry that keeps everything sitting where it should. The Tork Craft TCCS0355-SK03 Support Bracket Compl. is the correct replacement assembly for the TCCS0355, covering the support bracket compone..
N$ 527.28
Ex VAT:N$ 458.50
Brand: SAWSTOP
MPN: SAW CTS020
SUPPORT FOOT FRONT & LEFT REPLACEMENT FOR CTS....
N$ 670.45
Ex VAT:N$ 583.00
Brand: SAWSTOP
MPN: SAW CTS019
SUPPORT FOOT FRONT & RIGHT REPLACEMENT FOR CTS....
N$ 670.45
Ex VAT:N$ 583.00
Brand: SAWSTOP
MPN: SAW CTS023
SUPPORT FOOT REAR & CENTER REPLACEMENT FOR CTS....
N$ 154.68
Ex VAT:N$ 134.50
Brand: SAWSTOP
MPN: SAW CTS022
SUPPORT FOOT REAR & LEFT REPLACEMENT FOR CTS....
N$ 454.83
Ex VAT:N$ 395.50
Brand: SAWSTOP
MPN: SAW CTS021
SUPPORT FOOT REAR & RIGHT REPLACEMENT FOR CTS....
N$ 358.80
Ex VAT:N$ 312.00
Brand: SAWSTOP
MPN: SAW TGI2WA004
SUPPORT LEG MOUNT HARWARE BAG TGI2 TABLE....
N$ 478.40
Ex VAT:N$ 416.00
Brand: TORK CRAFT
MPN: TCRH0800-SK07
Tork Craft Switch Assembly Compl. (27, 35-36) For TCRH0800 (TCRH0800-SK07)
At a Glance: Complete switch assembly covering reference parts (27, 35 and 36) for the Tork Craft TCRH0800.
When a rotary hammer refuses to start, cuts out mid-job, or only runs if you hold the trigger “just so”, the switch assembly is usually where the drama lives. Dust ingress, arcing, wear and hard site life can all take their toll on the trigger and internal contacts. The Tork Craft TCRH0800-SK07 Switch Assembly..
N$ 330.63
Ex VAT:N$ 287.50
Brand: SAWSTOP
MPN: SAW CTS038
SWITCH BOX & ASSEMBLY & REPLACEMENT FOR CTS....
N$ 2,996.33
Ex VAT:N$ 2,605.50
Brand: TORK CRAFT
MPN: TCCS0355-SK07
Tork Craft Switch Compl. (29/82/88) For TCCS0355
At a Glance: Switch complete replacement assembly (parts 29, 82 and 88) for the Tork Craft TCCS0355 cut-off saw
When a cut-off saw starts playing mind-games — won’t start, starts only if you “wiggle it”, or cuts out mid-cut — the switch assembly is often the guilty party. The Tork Craft TCCS0355-SK07 Switch Compl. replaces the switching components (parts 29, 82 and 88) for the TCCS0355, restoring dependable control and helping ensure the too..
N$ 99.59
Ex VAT:N$ 86.60