Power Tools

Tork Craft Brush Holder Set (24/25) Service Kit For TCID0850 At a Glance: Replacement brush holder set (parts 24 and 25) for the Tork Craft TCID0850 impact driver Fresh carbon brushes are only half the story—if the brush holders are cracked, worn, or letting the brushes bind, the motor won’t get clean contact and performance can drop fast. The Tork Craft TCID0850-SK08 Brush Holder Set service kit replaces the brush holder components (parts 24 and 25), restoring proper brush alignment and s..

Tork Craft Brush Holder Set (42/44-46) Service Kit For TCID1100 At a Glance: Replacement brush holder set (parts 42 and 44–46) for the Tork Craft TCID1100 motor Carbon brushes can only do their job if they slide freely and stay correctly aligned against the commutator. If the brush holders are cracked, heat-damaged, worn, or packed with carbon dust, brushes can bind or sit skew—causing weak power, intermittent running and excessive sparking. The Tork Craft TCID1100-SK09 Brush Holder Set se..

Tork Craft Brush Holder Set Compl. (39/40/46/47) Service Kit (TCAG0115-SK12) At a Glance: Complete brush holder set (parts 39, 40, 46 & 47) for the Tork Craft TCAG0115 angle grinder Carbon brushes do the dirty work of delivering current into a spinning armature, but they can only do it properly if the brush holders are secure, aligned, and electrically sound. When brush holders crack, loosen, or their springs and seating points wear out, you’ll often see intermittent power, excessive spark..

Tork Craft Brush Holder Set Compl. (44-46/48/49) Service Kit (TCAG0230-SK12) At a Glance: Complete brush holder set (parts 44–46, 48 & 49) for the Tork Craft TCAG0230 angle grinder Carbon brushes can only do their job properly if the brush holders keep them aligned, secure and making consistent contact with the spinning armature. When holders crack, loosen, or the seating/spring action becomes unreliable, you may get intermittent power, excessive sparking, cutting out under load, or a grin..

BRUSH HOLDER WS 1204 205.931....

BRUSH KOHLE HG 29 230V ET-BG....

BRUSH KS 60 E 230V....

BRUSH OF 2000 E 1 PAIR....

BRUSH OF 2200 VOLLST....

Tork Craft Brush Pair, Brush Holder & Coil Spring (47–49) For POL06-2G At a Glance: Complete brush, holder and spring kit for the Tork Craft POL06-2G polisher The Tork Craft brush pair, brush holder and coil spring kit (Cat No. POL06-2G-SK04) is a genuine service kit for the Tork Craft POL06-2G 1500W 180mm polisher. Carbon brushes and their springs are wear components – as they shorten or lose tension, you may notice power loss, intermittent running, excess sparking or a burnin..

BRUSH POLLUX 180 ET-BG....