Power Tools

Tork Craft Stator (39) Service Kit (TCCS0185-SK09) At a Glance: Replacement stator (field coil) for the Tork Craft TCCS0185 cut-off saw – part 39 The stator is the stationary core of the motor that creates the magnetic field which drives the armature. When a stator fails, the symptoms can be dramatic: weak power, tripping, excessive heat, burning smell, inconsistent running, or a saw that simply won’t start. The Tork Craft TCCS0185-SK09 Stator replaces the component referenced as part 39, ..

Tork Craft Cord Set Compl. (47-49/57) Service Kit (TCCS0185-SK11) At a Glance: Complete replacement cord set (parts 47–49 and 57) for the Tork Craft TCCS0185 cut-off saw A cut-off saw cable gets dragged, tugged, kinked and occasionally “tested” against sharp edges and hot sparks. When the cord is damaged or internal connections become loose, you can get intermittent power, cutting out under load, tripping, or a very unsafe shock hazard. The Tork Craft TCCS0185-SK11 Cord Set Complete replac..

Tork Craft Switch Capacitor Kit (42-46) Service Kit (TCCS0185-SK12) At a Glance: Replacement switch and capacitor component kit (parts 42–46) for the Tork Craft TCCS0185 cut-off saw When a cut-off saw starts behaving like it has moods — cutting out under load, refusing to start, or running inconsistently — the switch and related electrical components are often on the suspect list. Capacitors (where used in the circuit) help stabilise electrical behaviour, while the switch is the main contr..

Tork Craft Brush Holder (52/54) Service Kit (TCCS0185-SK13) At a Glance: Replacement brush holder components (parts 52 & 54) for the Tork Craft TCCS0185 cut-off saw Carbon brushes can only do their job properly if the brush holders keep them aligned, secure and making consistent contact with the spinning armature. When holders crack, loosen, or the seating action becomes unreliable, you may get intermittent power, cutting out under load, or excessive sparking that rapidly wears the commuta..

Tork Craft Carbon Brush (53) Service Kit (TCCS0185-SK14) At a Glance: Replacement carbon brush for the Tork Craft TCCS0185 cut-off saw – part 53 Carbon brushes are consumable service items — they deliver electricity into the spinning armature, and over time they simply wear down. When a brush is worn, weak or damaged, you’ll often notice reduced power, intermittent cutting out, a “surging” feel under load, or excessive sparking at start-up. The Tork Craft TCCS0185-SK14 Carbon Brush replace..

SPRING LEX 3....

O-RING 22X1,5-NBR-70SHORE....

HOUSING SET BHC 18....

DRIVE UNIT CT DOMEL 230V....

GEAR C 18....