Power Tools
Brand: TORK CRAFT
MPN: TCRH0800
TorkCraft - Rotary Hammer 800W
Rated Speed: 0-1200 RPM
Voltage: 230V
Application:
Drilling into various masonry materials using various masonry drill bits.
Chiselling various masonry materials using various chiselling points.....
N$ 2,064.25
Ex VAT:N$ 1,795.00
Brand: TORK CRAFT
MPN: TORKIT042
Tork Craft Rotary Hammer TCRH0800 With SDS-plus Set ALP MB-5
At a Glance: 800W SDS-plus rotary hammer with Alpen MB-5 SDS drill bit set for concrete and brick
The Tork Craft Rotary Hammer TCRH0800 With SDS-plus Set ALP MB-5 (TORKIT042) is a powerful, grab-and-go masonry drilling kit for serious DIY and trade users. The 800W TCRH0800 rotary hammer delivers strong impact energy through an SDS-plus chuck, making light work of drilling anchor and plug holes in concrete, brick and block. The Alpe..
N$ 2,755.98
Ex VAT:N$ 2,396.50
Brand: TORK CRAFT
MPN: TORKIT020
Tork Craft Rotary Hammer 20V SDS-Plus Kit – Std. Charger & 2 × 4.0 Ah Batteries
Smash through concrete, brick and block—cord free. The Tork Craft RH500 (TC20190) runs on the 20 V platform with SDS-Plus convenience and a compact body that still packs serious percussive bite. With four modes (drill / hammer drill / chisel / chisel-adjust), up to 0–1500 rpm and ≈5500 bpm, it’s built for anchors, conduit runs, chasing and light chiselling—on site or at home. A bright LED work light and ..
N$ 4,620.13
Ex VAT:N$ 4,017.50
Brand: TORK CRAFT
MPN: TORKIT018
Tork Craft Rotary Hammer 20V SDS-Plus Kit – Std. Charger & 4.0 Ah Battery
Drill anchors, chase conduits and chip masonry anywhere—no cord required. The Tork Craft RH500 (TC20190) runs on the
20 V platform with SDS-Plus convenience and compact, hard-hitting performance. You get 4 modes (drill /
hammer drill / chisel / chisel-adjust) with up to 0–1500 rpm and around ≈5500 bpm for confident
performance in brick, block and concrete. A bright LED work light a..
N$ 3,635.15
Ex VAT:N$ 3,161.00
Brand: TORK CRAFT
MPN: TC20190-SK03
Tork Craft Rotary Hammer 20V Replacement Chuck & Gearbox Complete Kit (TC20190-SK03)
At a Glance: Complete chuck and gearbox service kit (items 1–37) for the TC20190 RH500 20V SDS-Plus rotary hammer
Give your Tork Craft RH500 20V rotary hammer a new lease of life by replacing the complete chuck and gearbox assembly instead of
retiring the tool. The TC20190-SK03 Rot/hamer 20V Replacement Chuck & Gearbox Complete (1–37) Service Kit brings together the
critical front-end components that dri..
N$ 1,365.05
Ex VAT:N$ 1,187.00
Brand: TORK CRAFT
MPN: TC20190-SK01
Tork Craft Rotary Hammer 20V Replacement Motor & Gear Kit (TC20190-SK01)
At a Glance: Genuine motor and gear kit (54/55) for the TC20190 20V SDS-Plus rotary hammer
When your Tork Craft RH500 20V rotary hammer starts to lose power, sound rough or battle to keep its speed under load, the problem is often
inside the drive train. The TC20190-SK01 Rot/hamer 20V Replacement Motor & Gear (54/55) Service Kit gives you a genuine Tork Craft spare
set that replaces the key motor and gear components. ..
N$ 1,064.90
Ex VAT:N$ 926.00
Brand: TORK CRAFT
MPN: TC20190-SK02
Tork Craft Rotary Hammer 20V Replacement Motor Support & Screws (50/51/52/53) Service Kit (TC20190-SK02)
At a Glance: Motor support bracket and screw kit for the TC20190 RH500 20V SDS-Plus rotary hammer
The motor in your Tork Craft RH500 20V rotary hammer does serious work every time you drill or chisel into concrete and masonry.
If the motor support or its screws are damaged, stripped or missing, the whole drive assembly can shift, causing vibration, noise
and premature wear. The TC2019..
N$ 54.51
Ex VAT:N$ 47.40