Power Tools

PINION KS120EB....

PINION MXP 1602 E....

PINION RS 100....

Tork Craft Pinion Shaft & Key (10-13) Stand Service Kit At a Glance: ; Replacement pinion shaft and key set covering stand parts 10-13 for the TCMD0055QE. If the feed action on your magnetic base drill feels sloppy, uneven, or starts slipping under load, the pinion shaft and key are prime suspects. This Tork Craft Pinion Shaft & Key stand service kit (parts 10-13) is made to restore solid engagement in the feed/drive mechanism on the TCMD0055QE, helping you get back to controlled, confiden..

Tork Craft Pinion Shaft & Key (10-13) Stand Service Kit (TCMD0035QE-SK019) At a Glance: Replacement pinion shaft and key for the TCMD0035QE stand—diagram parts (10–13) to restore solid feed engagement and smooth travel. The stand feed should feel direct: turn the handle, the head moves—smoothly and without surprises. When the pinion shaft or key wears, slips, or shears, you can get dead spots, uneven engagement, clicking under load, or sloppy movement that makes accurate drill..

Tork Craft Pinion Shaft & Key (13/14) Stand Service Kit At a Glance: Replacement pinion shaft and key components (parts 13 and 14) for the Tork Craft TCDM0035PM stand If your stand suddenly feels sloppy, skips under load, or the feed action isn’t lifting and lowering smoothly, the pinion shaft area is a prime suspect. The Tork Craft TCDM0035PM-SK24 Pinion Shaft & Key stand service kit replaces the key drive components (parts 13 and 14) that transfer your handle input into controlled moveme..

Tork Craft Pinion Shaft & Key (17, 18) Stand Service Kit (TCMD0068HD-SK18) At a Glance: Replacement pinion shaft and key for stand reference parts (17 and 18) on TCMD0068HD mag base drills. The pinion shaft is the heart of the stand’s feed mechanism—translating your handle movement into smooth, controlled travel along the rail. If the pinion shaft or key is worn, damaged, or has developed play, the feed can feel sloppy, uneven, or prone to slipping—leading to chatter and less accurate dril..

Tork Craft Pinion Shaft & Key (24/25) Stand Service Kit (TCMD0035-50HD-SK16) At a Glance: Replacement pinion shaft and key for the TCMD0035-50HD stand—diagram parts (24/25) for positive drive and smooth feed control. The pinion shaft is a small part with a big job: it transfers your handle input into controlled feed movement through the stand’s gear system. If the shaft is worn or the key is damaged, you can get slipping, uneven feed, extra play, or that nasty “jump” feeling t..

Tork Craft Pinion Shaft & Key (24/25) Stand Service Kit (TCMD0035HD-SK16) At a Glance: Replacement pinion shaft & key for the TCMD0035HD stand (parts 24/25) to restore solid feed engagement and smooth travel. The feed on a core drill stand should feel confident and predictable—turn the handle, the head moves. No slipping, no “dead spots”, no crunchy surprises. The Tork Craft TCMD0035HD-SK16 Pinion Shaft & Key Stand Service Kit replaces the components referenced as parts (24/25..

Tork Craft Pinion Shaft & Key (4, 5) Stand Service Kit (TCMD0035-SK16) At a Glance: Replacement pinion shaft and key for stand assembly reference parts (4 and 5) on TCMD0035 series mag base drills. On a mag base drill stand, the pinion shaft is the mechanical handshake between your feed handle and the drill’s vertical movement. When it wears, slips, or develops play, you’ll feel it as rough feeding, inconsistent engagement, or a “dead spot” when turning the handle. The Tork Craft TCMD0035-..

Tork Craft Pipe & Tube Cutter 6–35mm TC-PC635 With 300mm Pipe Wrench TC602300 At a Glance: Rotary pipe cutter for 6–35mm pipes plus a 300mm pipe wrench in one plumbing kit The Tork Craft Pipe & Tube Cutter 6–35mm TC-PC635 with 300mm Pipe Wrench TC602300 (TORKIT010) is a practical two-piece plumbing set for cutting and tightening pipes on the job. The rotary pipe and tube cutter makes clean, square cuts on common copper, brass and thin-wall steel pipes from 6mm up to 35mm in diameter, while t..