Power Tools

Tork Craft Cord & Clamp Kit (53/77/83/84) For TCCS0355 At a Glance: Replacement cord and clamp/strain relief kit (parts 53, 77, 83 and 84) for the Tork Craft TCCS0355 cut-off saw A cut-off saw draws serious power, which means the power cord and its strain relief take real abuse—dragged across floors, snagged around benches, and flexed thousands of times. When the cord is nicked, loose, or the clamp is cracked, you’re not just dealing with inconvenience; you’re dealing with a safety risk. T..

Tork Craft Motor & Gearbox Compl. (50-52/54-72) For TCCS0355 At a Glance: Motor and gearbox complete assembly (parts 50–52 and 54–72) for the Tork Craft TCCS0355 cut-off saw When a cut-off saw loses its punch, starts sounding rough, or develops that unpleasant “grindy” feeling under load, the problem is often deeper than a blade or a brush set. The Tork Craft TCCS0355-SK09 Motor & Gearbox Compl. is the complete drive assembly replacement for the TCCS0355, covering the motor and gearbox com..

Tork Craft Protective Cover & Active Cover (73/74) For TCCS0355 At a Glance: Replacement protective cover and active cover set (parts 73 and 74) for the Tork Craft TCCS0355 cut-off saw On a cut-off saw, the guard isn’t optional “extra plastic” — it’s the line between controlled cutting and flying debris doing interpretive dance around your workshop. The Tork Craft TCCS0355-SK10 Protective Cover & Active Cover set replaces the guard cover components (parts 73 and 74) on your TCCS0355, resto..

Tork Craft Flange Clamp Set (75/78/79) For TCCS0355 At a Glance: Replacement flange clamp set (parts 75, 78 and 79) for correct disc clamping on the Tork Craft TCCS0355 If the disc isn’t clamped properly, everything goes sideways—literally. Worn, damaged or mismatched flanges can cause wobble, uneven wear, extra vibration and risky cutting behaviour. The Tork Craft TCCS0355-SK11 Flange Clamp Set replaces the disc clamping components (parts 75, 78 and 79) on your TCCS0355 cut-off saw, resto..

Tork Craft Spring Lock Pin Kit (48/49) For TCCS0355 At a Glance: Replacement spring and lock pin kit (parts 48 and 49) for the Tork Craft TCCS0355 cut-off saw That lock pin might be small, but it has a big job: keeping the moving parts of your cut-off saw secure when you need it locked in place. If the pin is bent, the spring has lost tension, or the mechanism isn’t engaging cleanly, the saw can become awkward to store, transport, or set up safely. The Tork Craft TCCS0355-SK12 Spring Lock ..

CORDLESS DUST EXTRACTOR BASIC....

ROTOR LEX 3....

CIRCLIP DIN 471-7X0,8....

Tork Craft Drill Pop Spare Mandrell For TCRIV003 (TCRIV003-006) At a Glance: Replacement spare mandrell for the Tork Craft TCRIV003 pop riveter. Pop riveting is meant to be quick and satisfying: squeeze, set, snap—done. When the mandrell is worn, bent, or damaged, the tool can start slipping, setting inconsistently, or refusing to pull the rivet properly. The Tork Craft TCRIV003-006 Drill Pop Spare Mandrell is a replacement mandrell component for the TCRIV003 pop riveter, helping restore s..

Tork Craft Drill Pop Riveter Spare Noze Pieces 2.4mm For TCRIV003 (TCRIV003-01) At a Glance: Replacement 2.4mm nose piece for the Tork Craft TCRIV003 pop riveter. A pop riveter is only as good as the nose piece guiding the rivet and mandrel. If the tip is worn, burred, damaged or missing, rivets can sit skew, slip, or set inconsistently—turning a quick job into a comedy of errors. The Tork Craft TCRIV003-01 Drill Pop Riveter Spare Noze Piece (2.4mm) is a replacement nose piece designed for..