Electric
Brand: FESTOOL
MPN: FES574765
Festool Trimming saw CS 50 EBG PRECISIO
Order number: FES574765
Model: CS 50 EBG ....
N$ 51,804.86
Ex VAT:N$ 45,047.70
Brand: FESTOOL
MPN: FES575806
Festool Stirrer MX 1000 RE EF HS2
Order number: FES575806
Model: MX 1000 RE EF HS2 ....
N$ 10,068.14
Ex VAT:N$ 8,754.90
Brand: SAWSTOP
MPN: SAW MBPCSIND
Industrial
Mobile Base MB-PCS-IND
The SawStop® accessory part no. MB-PCS-IND: Complete
conversion kit makes the industrial mobile base compatible with the PCS
Quick facts:
Supports saw and extension table
No additional extension hardware required
1000 lb capacity
Mobility in any direction
Four 360° high performance casters
No flimsy wheel brakes
Non-marring polyurethane wheels
When disengaged, the saw rests firmly on the ground distributing weight
directly to the ..
N$ 19,203.85
Ex VAT:N$ 16,699.00
Brand: SAWSTOP
MPN: SAW PCS164
SAWSTOP SOCKET HEAD CAP SCREW M4X0.7X12MM FOR JSS....
N$ 13.80
Ex VAT:N$ 12.00
Brand: TORK CRAFT
MPN: TCAG0115-SK01
Tork Craft Flange Nut Back & Front (1/2) Service Kit For TCAG0115 Angle Grinder
At a Glance: Replacement back flange and front nut kit for the TCAG0115 115mm angle grinder
The flange nut set on your angle grinder does the crucial job of clamping cutting and grinding discs safely at 11 000 rpm.
If the back flange is worn, dirty or damaged – or the front nut is rounded from years of use – discs can slip, vibrate or be difficult
to tighten and release. The Tork Craft TCAG0115-SK01 Flange Nu..
N$ 59.34
Ex VAT:N$ 51.60
Brand: TORK CRAFT
MPN: TCAG0115-SK02
Tork Craft Grind Guard With Screws (3–5) Service Kit For TCAG0115 Angle Grinder
At a Glance: Replacement grind guard and mounting screws kit for the TCAG0115 115mm angle grinder
A sound grind guard is a non-negotiable safety feature on any angle grinder. It helps deflect sparks, fragments and debris away from you
and your surroundings. The Tork Craft TCAG0115-SK02 Grind Guard With Screws (3–5) Service Kit is a genuine replacement set for the
TCAG0115 Angle Grinder 115mm 900 W 11 000 rpm 22..
N$ 40.02
Ex VAT:N$ 34.80
Brand: TORK CRAFT
MPN: TCAG0115-SK03
Tork Craft Gear & Spindle Compl. (6-14/16/23) Service Kit (TCAG0115-SK03)
At a Glance: Complete gear & spindle assembly kit (items 6–14, 16 & 23) for the TCAG0115 115mm angle grinder
When an angle grinder starts sounding rough, losing power under load, or developing excessive play at the spindle, the culprit is often hiding in the gearbox. The Tork Craft TCAG0115-SK03 Gear & Spindle Complete Service Kit is a purpose-made replacement assembly designed to bring the drive train back to proper..
N$ 261.51
Ex VAT:N$ 227.40
Brand: TORK CRAFT
MPN: TCAG0115-SK04
Tork Craft Gear Box & Needle Bearing (15/17/18) Service Kit (TCAG0115-SK04)
At a Glance: Gearbox housing & needle bearing service kit (parts 15, 17 & 18) for the Tork Craft TCAG0115 angle grinder
The gearbox is the “front end” of an angle grinder where the high-speed motor power is converted into usable torque at the spindle. When the gearbox housing is damaged, worn, or no longer supports the internals correctly, you can end up with excessive vibration, heat, abnormal noise, and premature..
N$ 153.87
Ex VAT:N$ 133.80
Brand: TORK CRAFT
MPN: TCAG0115-SK05
Tork Craft Spindle Lock Pin & Spring (19/20) Service Kit (TCAG0115-SK05)
At a Glance: Spindle lock pin and spring replacement kit (parts 19 & 20) for the Tork Craft TCAG0115 angle grinder
The spindle lock is the small but mighty helper that makes disc and accessory changes quick and controlled. If your lock button feels weak, doesn’t “bite”, or slips when you try to loosen a flange nut, chances are the lock pin and/or spring has worn or been damaged. The Tork Craft TCAG0115-SK05 Spindle Lo..
N$ 13.80
Ex VAT:N$ 12.00
Brand: TORK CRAFT
MPN: TCAG0115-SK06
Tork Craft Replacement Auxiliary Handle (21) Service Kit (TCAG0115-SK06)
At a Glance: Replacement side (auxiliary) handle for the Tork Craft TCAG0115 angle grinder – part 21
An angle grinder is all torque and attitude—so the auxiliary handle is not a “nice-to-have”, it’s your control lever. If your side handle is missing, cracked, or no longer tightens properly, you lose stability and increase fatigue (and the chance of kickback surprises). The Tork Craft TCAG0115-SK06 Replacement Auxiliar..
N$ 13.80
Ex VAT:N$ 12.00
Brand: TORK CRAFT
MPN: TCAG0115-SK07
Tork Craft Repl. Bearing & Bush (24/31/32) Service Kit (TCAG0115-SK07)
At a Glance: Replacement bearing & bush kit (parts 24, 31 & 32) for the Tork Craft TCAG0115 115mm angle grinder
Bearings and bushes are the unsung heroes inside an angle grinder—quietly keeping everything aligned while the tool does loud, messy work. When these support parts wear, you’ll often notice extra vibration, rough running, heat build-up, or a “wobble” feeling that makes the grinder harder to control. The Tork C..
N$ 65.55
Ex VAT:N$ 57.00
Brand: TORK CRAFT
MPN: TCAG0115-SK08
Tork Craft Repl. Armature & Magnetic Ring (22/28/29/30) Service Kit (TCAG0115-SK08)
At a Glance: Replacement armature and magnetic ring kit (parts 22, 28, 29 & 30) for the Tork Craft TCAG0115 115mm angle grinder
When an angle grinder starts losing punch, running unevenly, sparking excessively, or sounding “angry” in all the wrong ways, the motor internals are often the culprit. The Tork Craft TCAG0115-SK08 Repl. Armature & Magnetic Ring Service Kit replaces the key motor drive components r..
N$ 365.70
Ex VAT:N$ 318.00