Drills

Tork Craft Imp. Drill Carbon Brush Pair (43) Service Kit For TCID1100 At a Glance: Replacement carbon brush pair (part 43) for the Tork Craft TCID1100 motor Carbon brushes are the motor’s “sliding contacts” that feed power into the spinning armature. When they wear down, the symptoms show up quickly: weaker power, intermittent running, excessive sparking, and sometimes a tool that won’t start without a bit of persuasion. The Tork Craft TCID1100-SK10 Imp. Drill Carbon Brush Pair service kit..

Tork Craft Repl. Trigger Compl. Kit (47-49) Service Kit For TCID1100 At a Glance: Replacement trigger complete kit (parts 47–49) for the Tork Craft TCID1100 impact drill/driver When a trigger starts misbehaving, the whole tool becomes a gamble—dead spots, inconsistent speed response, random cut-outs, or a trigger that feels sticky and worn. The Tork Craft TCID1100-SK11 Repl. Trigger Compl. kit replaces the trigger components (parts 47–49), restoring dependable control response so your TCID..

Tork Craft Repl. Cable & Sheath (50-53) Service Kit For TCID1100 At a Glance: Replacement cable and protective sheath kit (parts 50–53) for the Tork Craft TCID1100 Cables are the tool’s lifeline—and they’re also the part most likely to get yanked, snagged, crushed, or “repaired” with tape and optimism. If your TCID1100 cable is frayed, cut, loose at the entry point, or the protective sheath is split, you’re dealing with a safety risk and a reliability problem. The Tork Craft TCID1100-SK12 ..

Tork Craft Housing L/R With Screws (54-56) Service Kit For TCID1100 At a Glance: Replacement left and right housing with screws (parts 54–56) for the Tork Craft TCID1100 The housing is your tool’s protective shell and structural backbone. It keeps the motor, gearbox and wiring supported, protects against dust and impacts, and gives you the grip and control you need during high-torque work. If the housing is cracked, stripped at the screw points, or no longer closing properly, the tool can ..

Tork Craft Auxilary Handle Compl. With Rod (57-61) Service Kit For TCID1100 At a Glance: Auxilary handle complete with rod service kit (parts 57–61) for improved control on the Tork Craft TCID1100 When torque ramps up, an impact drill/driver can try to twist itself out of your hands—especially on larger fasteners or heavier drilling. An auxiliary handle gives you the extra leverage and stability needed to stay in control and work more comfortably. If your original handle is missing, cracke..

Tork Craft Tool Holder MT2 × 19.05 mm Inner for Weldon Shank Morse Taper Highlights: MT2 taper, 19.05 mm inner bore, compatible with Weldon shank tools The Tork Craft Tool Holder MT2 × 19.05 mm Inner for Weldon Shank Morse Taper is a precisely engineered holder designed to deliver accurate, rigid clamping of tooling in lathe and milling applications. Featuring an MT2 (Morse Taper No. 2) outer taper paired with an inner bore of 19.05 mm (¾″) for Weldon shank tools, this holder enables quick and..

Tork Craft Chuck Adaptor 19.05 mm × ½″ × 20 UNF Weldon Shank Highlights: 19.05 mm (¾″) inner bore × ½″-20 UNF thread, Weldon shank mount The Tork Craft Chuck Adaptor 19.05 mm × ½″ × 20 UNF Weldon Shank is engineered to bridge your Weldon-shank tooling to standard ½″-20 UNF threaded chucks. With a precise 19.05 mm bore and robust Weldon-shank interface, this adaptor provides secure clamping, excellent concentricity and reliable performance for lathe, milling and drilling applications. >..

Tork Craft Drift Key ½″ Highlights: ½″ square drive key, hardened steel construction, designed for safe removal of pulleys and assemblies The Tork Craft Drift Key ½″ (TCMD004) is a high-quality, workshop-grade removal tool crafted for mechanics and technicians who routinely service pulleys, retainer rings, hubs and other pressed or secured components. Featuring a robust ½″ square drive interface, this drift key fits standard sockets or breaker bars, making it easy to apply torque for safe and ..

Tork Craft Control Panel & Motor Switch (34/37/38) Stand Service Kit At a Glance: Replacement control panel and motor switch components (parts 34, 37 and 38) for the Tork Craft TCDM0035PM stand When a stand’s controls start acting up—intermittent switching, inconsistent starts, or a switch that feels “tired” and unpredictable—your entire setup becomes the weak link. The Tork Craft TCDM0035PM-SK22 Control Panel & Motor Switch service kit replaces the key control and switching components (pa..

Tork Craft Repl. Handle (15-17) Stand Service Kit At a Glance: Replacement handle components (parts 15–17) for the Tork Craft TCDM0035PM stand The handle on a drill stand does more than just “move the head up and down” — it’s your control lever for precision, pressure and safety. If the handle is bent, loose, cracked, or missing parts, you lose smooth feed control and accuracy suffers fast. The Tork Craft TCDM0035PM-SK23 Repl. Handle stand service kit replaces the handle components (parts ..

Tork Craft Pinion Shaft & Key (13/14) Stand Service Kit At a Glance: Replacement pinion shaft and key components (parts 13 and 14) for the Tork Craft TCDM0035PM stand If your stand suddenly feels sloppy, skips under load, or the feed action isn’t lifting and lowering smoothly, the pinion shaft area is a prime suspect. The Tork Craft TCDM0035PM-SK24 Pinion Shaft & Key stand service kit replaces the key drive components (parts 13 and 14) that transfer your handle input into controlled moveme..