Spare Parts

STANDARD TABLE SAW INSERT FOR CTS....

Tork Craft Base & Feet Kit (1-3) For TCCS0355 At a Glance: Replacement base & feet kit (parts 1–3) designed for the Tork Craft TCCS0355 cut-off saw When a cut-off saw loses its footing, everything feels sketchy — alignment suffers, vibration increases, and accuracy goes out the window. The Tork Craft TCCS0355-SK01 Base & Feet Kit restores the stable foundation of your TCCS0355 2700W 355mm cut-off saw, bringing it back to that solid, confidence-inspiring stance it was built for. It’s the ri..

Tork Craft Vice Stand Compl. (2/4-19) For TCCS0355 At a Glance: Complete vice/stand assembly replacement (parts 2 and 4–19) for the Tork Craft TCCS0355 cut-off saw A cut-off saw is only as good as its grip. If the vice is worn, bent, or simply not clamping square anymore, your workpiece can creep, chatter, and ruin an otherwise perfect cut. The Tork Craft TCCS0355-SK02 Vice Stand Compl. is the proper replacement assembly for the TCCS0355, bringing back firm clamping, better control, and th..

Tork Craft Support Bracket Compl. (2/4/12/20-28/30-38/89-90) For TCCS0355 At a Glance: Support bracket complete assembly (parts 2, 4, 12, 20–28, 30–38, 89–90) for the Tork Craft TCCS0355 When a cut-off saw starts feeling “loose”, misaligned, or inconsistent, the culprit is often the supporting bracketry that keeps everything sitting where it should. The Tork Craft TCCS0355-SK03 Support Bracket Compl. is the correct replacement assembly for the TCCS0355, covering the support bracket compone..

Tork Craft Carbon Brushes (45) For TCCS0355 At a Glance: Replacement carbon brush set (part 45) designed for the Tork Craft TCCS0355 cut-off saw Carbon brushes are the quiet little workhorses inside your motor — and when they wear down, the tool starts acting weird: power drops, arcing increases, and the motor may cut in and out (or refuse to start at all). The Tork Craft TCCS0355-SK04 Carbon Brushes are the correct replacement set for the TCCS0355 cut-off saw, restoring solid electrical c..

Tork Craft Carbon Brush Holder (44/46) For TCCS0355 At a Glance: Replacement carbon brush holder components (parts 44 and 46) for the Tork Craft TCCS0355 cut-off saw New brushes won’t help much if the brush holder is cracked, worn, or letting the brush bind instead of sliding freely. The Tork Craft TCCS0355-SK05 Carbon Brush Holder kit replaces the brush holder components (parts 44 and 46) that guide and support the carbon brushes in your TCCS0355 cut-off saw. It’s the right repair when th..

Tork Craft Tool Housing Kit Compl. (40-43/47/80/81/85-87) For TCCS0355 At a Glance: Tool housing kit complete assembly (parts 40–43, 47, 80, 81, 85–87) for the Tork Craft TCCS0355 cut-off saw The housing on a cut-off saw isn’t just “plastic around the motor” — it’s the protective shell that keeps dust where it belongs, supports internal components, and gives you safe, confident handling. If your TCCS0355 housing is cracked, stripped at the screw points, or no longer closing up properly, th..

Tork Craft Switch Compl. (29/82/88) For TCCS0355 At a Glance: Switch complete replacement assembly (parts 29, 82 and 88) for the Tork Craft TCCS0355 cut-off saw When a cut-off saw starts playing mind-games — won’t start, starts only if you “wiggle it”, or cuts out mid-cut — the switch assembly is often the guilty party. The Tork Craft TCCS0355-SK07 Switch Compl. replaces the switching components (parts 29, 82 and 88) for the TCCS0355, restoring dependable control and helping ensure the too..

Tork Craft Cord & Clamp Kit (53/77/83/84) For TCCS0355 At a Glance: Replacement cord and clamp/strain relief kit (parts 53, 77, 83 and 84) for the Tork Craft TCCS0355 cut-off saw A cut-off saw draws serious power, which means the power cord and its strain relief take real abuse—dragged across floors, snagged around benches, and flexed thousands of times. When the cord is nicked, loose, or the clamp is cracked, you’re not just dealing with inconvenience; you’re dealing with a safety risk. T..

Tork Craft Motor & Gearbox Compl. (50-52/54-72) For TCCS0355 At a Glance: Motor and gearbox complete assembly (parts 50–52 and 54–72) for the Tork Craft TCCS0355 cut-off saw When a cut-off saw loses its punch, starts sounding rough, or develops that unpleasant “grindy” feeling under load, the problem is often deeper than a blade or a brush set. The Tork Craft TCCS0355-SK09 Motor & Gearbox Compl. is the complete drive assembly replacement for the TCCS0355, covering the motor and gearbox com..

Tork Craft Protective Cover & Active Cover (73/74) For TCCS0355 At a Glance: Replacement protective cover and active cover set (parts 73 and 74) for the Tork Craft TCCS0355 cut-off saw On a cut-off saw, the guard isn’t optional “extra plastic” — it’s the line between controlled cutting and flying debris doing interpretive dance around your workshop. The Tork Craft TCCS0355-SK10 Protective Cover & Active Cover set replaces the guard cover components (parts 73 and 74) on your TCCS0355, resto..

Tork Craft Flange Clamp Set (75/78/79) For TCCS0355 At a Glance: Replacement flange clamp set (parts 75, 78 and 79) for correct disc clamping on the Tork Craft TCCS0355 If the disc isn’t clamped properly, everything goes sideways—literally. Worn, damaged or mismatched flanges can cause wobble, uneven wear, extra vibration and risky cutting behaviour. The Tork Craft TCCS0355-SK11 Flange Clamp Set replaces the disc clamping components (parts 75, 78 and 79) on your TCCS0355 cut-off saw, resto..