Annular / Broach / Weldon Shank

Annular Cutters 55mm long Annular Cutter: Ø 50 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is the twist..

Tork Craft Annular Hole Cutter — HSS 55 × 30 mm, 19.05 mm (3/4') Weldon Size: 55 mm x 30 mm [3/4' Weldon Shank] This 55 mm diameter HSS annular cutter from Tork Craft is engineered for large-hole broaching in steel and cast-iron where depth is limited. With a 30 mm cutting depth and robust 19.05 mm (3/4″) Weldon shank, it delivers clean, burr-reduced holes with minimal feed force — ideal for flange, pipe, or structural plate applications where larger clearances are required.....

Tork Craft Annular Hole Cutter — HSS 55 × 55 mm, 19.05 mm (3/4') Weldon Size: 55 mm x 55 mm [3/4' Weldon Shank] This 55 mm diameter HSS annular cutter from Tork Craft is engineered for large-hole broaching in steel and cast-iron where depth is limited. With a 55 mm cutting depth and robust 19.05 mm (3/4″) Weldon shank, it delivers clean, burr-reduced holes with minimal feed force — ideal for flange, pipe, or structural plate applications where larger clearances are required.....

Tork Craft Annular Hole Cutter — HSS 58 × 30 mm, 19.05 mm (3/4') Weldon Shank Size: 58 mm x 30 mm [3/4' Weldon Shank] This 58 mm diameter HSS annular cutter from Tork Craft is built for making large-clearance holes where depth is limited. With a 30 mm cutting depth and robust 19.05 mm (3/4') Weldon shank, it delivers fast, clean broaches with minimal burrs, reduced feed force and consistent performance in steel or cast-iron plate.....

Tork Craft Annular Hole Cutter — HSS 58 × 55 mm, 19.05 mm (3/4') Weldon Shank Size: 58 mm x 55 mm [3/4' Weldon Shank] This 58 mm diameter HSS annular cutter from Tork Craft is built for making large-clearance holes where depth is limited. With a 55 mm cutting depth and robust 19.05 mm (3/4') Weldon shank, it delivers fast, clean broaches with minimal burrs, reduced feed force and consistent performance in steel or cast-iron plate.....

Tork Craft Annular Hole Cutter — TCT, 12 × 35 mm, Weldon Shank 19.05 mm (Model TCAC012-3) The Tork Craft TCAC012-3 is a tungsten-carbide tipped (TCT) annular cutter with a 12 mm diameter and 35 mm cutting depth, featuring a 19.05 mm Weldon Shank design. This tool is engineered for efficient core drilling through steel, structural sections and other metal fabrication work where precise, clean holes are needed.....

Tork Craft Annular Hole Cutter — TCT, 14 × 35 mm, Weldon Shank 19.05 mm (Model TCAC014-3) The Tork Craft TCAC014-3 is a tungsten-carbide tipped (TCT) annular cutter with a 14 mm diameter and 35 mm cutting depth, featuring a 19.05 mm Weldon shank. Engineered for steel fabrication and structural work, this tool delivers fast, clean holes in metal with minimal material waste and exceptional precision.....

Tork Craft Annular Hole Cutter — TCT, 14 × 55 mm, Weldon Shank 19.05 mm (Model TCAC014-4) The Tork Craft TCAC014-4 is a tungsten-carbide tipped (TCT) annular cutter with a 14 mm diameter and 55 mm cutting depth, featuring a 19.05 mm Weldon shank. This tool is engineered for high-performance core drilling in steel fabrication, structural sections and precision metalwork where clean, accurate holes are required.....

Tork Craft Annular Hole Cutter — TCT, 16×35 mm, Weldon Shank 19.05 mm (Model TCAC016-3) The Tork Craft TCAC016-3 annular cutter features a 16 mm diameter and 35 mm cutting depth, with a 19.05 mm Weldon shank for use in magnetic drills and fabrication rigs. The TCT (tungsten carbide tipped) cutting edges provide excellent durability and precision, allowing fast, clean core-hole drilling in structural steel, fabrication and metalwork.....

Tork Craft Annular Hole Cutter — TCT, 16 × 55 mm, Weldon Shank 19.05 mm (Model TCAC016-4) The Tork Craft TCAC016-4 annular cutter features a 16 mm diameter with a 55 mm cutting depth and a 19.05 mm Weldon shank. Built for demanding fabrication work, its tungsten-carbide tipped (TCT) cutting edges ensure fast, clean holes in steel, structural sections or pipe applications where precision and durability matter.....

Tork Craft Annular Hole Cutter — TCT 18 × 35 mm, 19.05 mm (3/4') Weldon Size: 18 mm x 35 mm [3/4' Weldon Shank] The Tork Craft 18 mm TCT annular cutter is built for speed and durability when drilling through tough materials. Tungsten-carbide tips stay sharp longer, while the thin-wall design removes only a ring of material for faster cuts, less feed pressure, and minimal burrs. Perfect for mag-base drills on site or in the workshop when you need repeatable, precision holes.....