Drilling
Brand: TORK CRAFT
MPN: TCAC020-2
Annular Cutters 55mm long
Annular Cutter: Ø20mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the twis..
N$ 677.35
Ex VAT:N$ 589.00
Brand: TORK CRAFT
MPN: TCAC021-1
Annular Cutters 30mm
Annular Cutter: Ø21mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the twist dr..
N$ 516.35
Ex VAT:N$ 449.00
Brand: TORK CRAFT
MPN: TCAC021-2
Annular Cutters 55mm long
Annular Cutter: Ø21mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the twis..
N$ 686.55
Ex VAT:N$ 597.00
Brand: TORK CRAFT
MPN: TCAC022-1
Annular Cutters 30mm
Annular Cutter: Ø22mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the twist dr..
N$ 575.00
Ex VAT:N$ 500.00
Brand: TORK CRAFT
MPN: TCAC022-2
Annular Cutters 55mm long
Annular Cutter: Ø22mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the twis..
N$ 722.78
Ex VAT:N$ 628.50
Brand: TORK CRAFT
MPN: TCAC023-1
Annular Cutters 30mm
Annular Cutter: Ø23mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the twist dr..
N$ 569.83
Ex VAT:N$ 495.50
Brand: TORK CRAFT
MPN: TCAC023-2
Annular Cutters 55mm long
Annular Cutter: Ø23mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the twis..
N$ 769.35
Ex VAT:N$ 669.00
Brand: TORK CRAFT
MPN: TCAC024-1
Annular Cutters 30mm
Annular Cutter: Ø24mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the twist dr..
N$ 619.85
Ex VAT:N$ 539.00
Brand: TORK CRAFT
MPN: TCAC024-2
Annular Cutters 55mm long
Annular Cutter: Ø24mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the twis..
N$ 840.08
Ex VAT:N$ 730.50
Brand: TORK CRAFT
MPN: TCAC025-1
Annular Cutters 30mm
Annular Cutter: Ø25mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the twist dril..
N$ 608.93
Ex VAT:N$ 529.50
Brand: TORK CRAFT
MPN: TCAC025-2
Annular Cutters 55mm long
Annular Cutter: Ø25mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the tw..
N$ 871.13
Ex VAT:N$ 757.50
Brand: TORK CRAFT
MPN: TCAC026-1
Annular Cutters 30mm
Annular Cutter: Ø26mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the twist dril..
N$ 719.33
Ex VAT:N$ 625.50