Backing Pads

Backing pad for angle grinder Backing pad to be used with an angle grinder with M14 thread. DIA: 115mm THREAD: M14 Hook & Loop: No DENSITY: Hard MAX RPM: 11,500 Application: This is a backing pad for an angle grinder to use fibre discs. The range of fibre discs can be viewed here. CAUTION: Due to the high rotation speed of angle grinders, it is not recommended to use polishing bonnets with this backing pad. ATTENTION: Wear eye, face and body protection....

Backing pad Rubber backing pad to be used with a drill DIA: 150mm (6') HOLES: No ARBOR: Ø6mm Hook & Loop: No Application: This is a backing pad for fibre discs or polishing bonnets. The backing pad is fitted with an arbor to be used with electric or cordless drills. The rubber is flexible and allows  for flat or contoured sanding without gouging. Attention: Wear eye, face and body protection....

Backing pad for angle grinder Backing pad to be used with an angle grinder to polish stone. DIA: 100mm THREAD: M14 Hook & Loop: No MAX RPM: 8,600 Application: This is a backing pad for an angle grinder to use fibre discs. The range of fibre discs can be viewed here. CAUTION: Due to the high rotation speed of angle grinders, it is not recommended to use polishing bonnets with this backing pad. ATTENTION: Wear eye, face and body protection....

Flange spanner Application: A flange spanner is used to remove the outer flange on an angle grinder to replace or change the abrasive grinding disc. The measurements of the pins on the flange spanner is: 35 x Ø4mm....

Flange spanner A flange spanner is used to remove the outer flange on an angle grinder to replace or change the abrasive grinding disc. The measurements of the pins on the flange spanner is: 35 x Ø5mm....

4-Way Wheel Spanner 14" Body diameter: Ø14mm Total length: 350mm 6 point socket size: 17-19-21-23mm Classification: Standard (Yellow) This 4-way wheel spanner is an indispensable tool for changing tires on a wide range of vehicles. It features four different socket sizes: 17mm, 19mm, 21mm, and 23mm, making it compatible with most standard lug nuts. The cross-shaped design provides exceptional leverage, allowing for easy loosening and tightening of even the most st..

SANDING PAD SSH-STF-DELTA-9....

Adjustable Pin Spanner for Angle Grinder - 15-52 x 4mm Pin Centers: 15 - 52mm Too big - too small, adjust the fit. Tork Craft's adjustable pin spanner is designed to fit most Angle grinder flange nuts and more with pin hole diameters of 4mm, ranging from 15mm-52mm centre to centre pin spacing. At the bottom end of the spanner is a flat tip allowing for easy paint can opening as well as built into the handle is a basic wrench with sizes 10,12,13,14,15,17,19mm. This 3-in-1 t..

QUICK ACTION NUT FASTFIX D115-150 M14....

Festool Clamping nut UF-AG M14 Order number: FES769018 Model: UF-AG M14 ....

Festool Spanner KF-AG Order number: FES769040 Model: KF-AG ....

TorkCraft - Screw Type Backing Pad Kit Size: 50 mm Application: Sanding and surface conditioning discs are good for removal of metal burs, paint, rust and finishing applications. Worls well on Die-grinders and electric drills. Quick change replacement screw type backing pad Arbot included Use with screw type back pad TCFA03007 WARNING: Using any tool can be dangerous. Always select the right tool for the job. NOTE: Use with screw type backing pad TCF..