Abrasive / Grinding / Polish
Brand: TORK CRAFT
MPN: TCBF150-50W
Unstitched buff
Material:
Cotton
Diameter: Ø150mm
Ply: 50
Bore: Ø1/2'
Usage: Use with finishing compounds.
Application:
Different metals have varying characteristics. To achieve the best possible
result, it is essential that the correct compound and polishing buff is selected
for the job.
The cutting compound should be used on a Sisal buff
or stitched buff. A white stitched buff is ideal for cutting into
metals. With the correct compound it will remove stretcher s..
N$ 189.75
Ex VAT:N$ 165.00
Brand: TORK CRAFT
MPN: TCBF15030
Buffing wheel kit
Buffing wheels in the kit:
(x1) Ø150mm Sisal stitched buff
(x1) ø150mm denim stitched buff
(x1) ø150mm cotton stitched buff
Application:
Different metals have varying characteristics. To achieve the best possible
result, it is essential that the correct compound and polishing buff is selected
for the job.
The cutting compound should be used on a Sisal buff
or stitched buff. A white stitched buff is ideal for cutting into
metals. With the correc..
N$ 420.84
Ex VAT:N$ 365.95
Brand: TORK CRAFT
MPN: TCBF200-2C
Stitched buff
Material: Denim
Width: 20mm
Diameter: Ø200mm
Sections: 3
Bore: Ø1/2'
Usage: Use with cutting compounds.
Application:
Different metals have varying characteristics. To achieve the best possible
result, it is essential that the correct compound and polishing buff is selected
for the job.
The cutting compound should be used on a Sisal buff
or stitched buff. A white stitched buff is ideal for cutting into
metals. With the correct compound it will remove s..
N$ 272.44
Ex VAT:N$ 236.90
Brand: TORK CRAFT
MPN: TCBF200-2W
Stitched buff
Material:
Cotton
Width: 20mm
Diameter: Ø200mm
Sections: 2
Bore: Ø1/2'
Usage: Use with cutting compounds.
Application:
Different metals have varying characteristics. To achieve the best possible
result, it is essential that the correct compound and polishing buff is selected
for the job.
The cutting compound should be used on a Sisal buff
or stitched buff. A white stitched buff is ideal for cutting into
metals. With the correct compound it will remov..
N$ 315.22
Ex VAT:N$ 274.10
Brand: TORK CRAFT
MPN: TCBF200-3W
Stitched buff
Material:
Cotton
Width: 30mm
Diameter: Ø200mm
Sections: 3
Bore: Ø1/2'
Usage: Use with cutting compounds.
Application:
Different metals have varying characteristics. To achieve the best possible
result, it is essential that the correct compound and polishing buff is selected
for the job.
The cutting compound should be used on a Sisal buff
or stitched buff. A white stitched buff is ideal for cutting into
metals. With the correct compound it will remov..
N$ 474.66
Ex VAT:N$ 412.75
Brand: TORK CRAFT
MPN: TCBF200-50W
Unstitched buff
Material:
Cotton
Diameter: Ø200mm
Ply: 50
Bore: Ø1/2'
Usage: Use with finishing compounds.
Application:
Different metals have varying characteristics. To achieve the best possible
result, it is essential that the correct compound and polishing buff is selected
for the job.
The cutting compound should be used on a Sisal buff
or stitched buff. A white stitched buff is ideal for cutting into
metals. With the correct compound it will remove stretcher s..
N$ 278.88
Ex VAT:N$ 242.50
Brand: TORK CRAFT
MPN: TCBP115-1
Backing pad for angle grinder
Backing pad to be used with an angle grinder with M14 thread.
DIA: 115mm
THREAD: M14
Hook & Loop: No
MAX RPM: 11,500
Application:
This is a backing pad for an angle grinder to use fibre discs.
The range of fibre discs can be viewed
here.
CAUTION:
Due to the high rotation speed of angle grinders, it is not recommended to use
polishing bonnets with this backing pad.
ATTENTION:
Wear eye, face and body protection....
N$ 108.56
Ex VAT:N$ 94.40
Brand: TORK CRAFT
MPN: TCBP115-2
Backing pad for angle grinder
Backing pad to be used with an angle grinder with M14 thread.
DIA: 115mm
THREAD: M14
Hook & Loop: No
DENSITY: Soft
MAX RPM: 11,500
Application:
This is a backing pad for an angle grinder to use fibre discs.
The range of fibre discs can be viewed
here.
CAUTION:
Due to the high rotation speed of angle grinders, it is not recommended to use
polishing bonnets with this backing pad.
ATTENTION:
Wear eye, face and body protection....
N$ 102.47
Ex VAT:N$ 89.10
Brand: TORK CRAFT
MPN: TCBP115-3
Backing pad for angle grinder
Backing pad to be used with an angle grinder with M14 thread.
DIA: 115mm
THREAD: M14
Hook & Loop: No
DENSITY: Hard
MAX RPM: 11,500
Application:
This is a backing pad for an angle grinder to use fibre discs.
The range of fibre discs can be viewed
here.
CAUTION:
Due to the high rotation speed of angle grinders, it is not recommended to use
polishing bonnets with this backing pad.
ATTENTION:
Wear eye, face and body protection....
N$ 107.01
Ex VAT:N$ 93.05
Brand: TORK CRAFT
MPN: TCBP150C
Backing pad
Rubber backing pad to be used with a drill
DIA: 150mm (6')
HOLES: No
ARBOR: Ø6mm
Hook & Loop: No
Application:
This is a backing pad for fibre discs or polishing bonnets. The backing pad
is fitted with an arbor to be used with electric or cordless drills.
The rubber is flexible and allows for flat or contoured sanding without gouging.
Attention:
Wear eye, face and body protection....
N$ 108.68
Ex VAT:N$ 94.50
Brand: TORK CRAFT
MPN: TCBP178-1
Backing pad for angle grinder
Backing pad to be used with an angle grinder to polish stone.
DIA: 100mm
THREAD: M14
Hook & Loop: No
MAX RPM: 8,600
Application:
This is a backing pad for an angle grinder to use fibre discs.
The range of fibre discs can be viewed
here.
CAUTION:
Due to the high rotation speed of angle grinders, it is not recommended to use
polishing bonnets with this backing pad.
ATTENTION:
Wear eye, face and body protection....
N$ 129.49
Ex VAT:N$ 112.60
Brand: TORK CRAFT
MPN: TCBU10606
TorkCraft - Cylindrical Rotary Burr
Diameter: 6 mm
Cutting Length: 16 mm
Max Operating Speed: 65000RPM
Application:
The Tork Craft Rotary burr for cutting steel, stainless steel, cast iron,
high alloy, and brass. For a smooth surface finish. Max operating speed is
65000RPM but the recommended starting speed is 40000RPM.
For cutting stainless steel, steel, cast iron, high alloy & brass
Smooth surface finish
Max Operating speed: 65 000RPM
Recommende..
N$ 238.05
Ex VAT:N$ 207.00