Menu
Your Cart
0

Taper Adapter Mt2 - Jt4

Taper Adapter Mt2 - Jt4
Taper Adapter Mt2 - Jt4
NOTE
Please confirm that stock is available before visiting.
  • Stock: 284
  • MPN: CMJT4-1
  • Weight: 0.34kg
  • Dimensions: 145.00mm x 34.00mm x 34.00mm
  • SKU: CMJT4-1
  • UPC: 6009515888480
TORK CRAFT TORK CRAFT
Based on 0 reviews. - Write a review
N$ 138.92
Ex VAT: N$ 120.80
Contact us
Add to Wish List

Tork Craft Taper Adapter — MT2 to JT4 (Morse → Jacobs)

Adapt MT2 (Morse Taper #2) spindles/arbors to accept JT4 (Jacobs Taper #4) drill chucks. This hardened, precision-ground adapter ensures concentric seating for smooth, accurate drilling on drill presses, lathe tailstocks and milling machines (drill mode).

Write a review

Bad Good
Captcha

Features

  • Conversion: MT2 male shank → JT4 male taper (for JT4-bore chucks).
  • Precision-ground tapers for low run-out and reliable grip.
  • Hardened steel construction for durability in workshop use.
  • Smooth finish seats and releases cleanly.
  • Industry-standard geometry compatible with common machines and arbors.

Benefits

  • Versatility: mount JT4 chucks onto MT2 machines without replacing arbors.
  • Accuracy: concentric fit improves hole quality and extends tool life.
  • Quick setup: simple press-fit—no special tools required for assembly.

Specifications

Description Spec
BrandTork Craft
Model / Cat No.CMJT4-1
Product TypeTaper adapter
Input Taper (Machine Side)MT2 (Morse Taper #2), male
Output Taper (Chuck Side)JT4 (Jacobs Taper #4), male
MaterialHardened, precision-ground steel
FinishGround, smooth seating surfaces
Typical UsesFitting JT4 drill chucks to MT2 drill presses, lathe tailstocks, mills (drill mode)

 

Download the Specification sheet:
Download PDF File
View the Specification sheet:
View PDF File

Extra Information

  • Thoroughly clean and degrease both tapers before assembly; debris reduces holding power.
  • Seat the chuck with a firm hand press on a solid surface—avoid hammering on the chuck body.
  • Remove using the machine’s eject feature or correct taper drift/wedge.

Pro Tip

  • Mark the adapter and chuck with a reference line; reassembling to the same orientation can preserve best concentricity.
  • If the fit feels tight, lightly stone any raised burrs—never sand or file the seating surfaces.

Safety

  • Disconnect power before installing/removing chucks or adapters.
  • Ensure tapers are fully seated; avoid side-loading small drills.
  • Use rotary drilling only—do not use hammer/impact with taper-mounted chucks.
  • Wear eye protection and secure the workpiece properly.
Tags: Brand TORK CRAFT , Morse Taper , MT2 to JT4 , Jacobs Taper
Quickview
Flap Disc Round Edge A/o 115mm 120 Grit Flat
Flap Disc Round Edge A/o 115mm 120 Grit Flat
Round Edge Flat Flap Disc - Bulk Grit: 120 Diameter: Ø115mm Arbor: Ø22.22mm Max RPM: 13 300 Introducing the Round Edge Flat..
N$ 54.45
Ex VAT:N$ 47.35
Contact us
Add to Wish List
Quickview
100mm Diamond Polishing Pad 100 Grit Dry Use 100mm Diamond Polishing Pad 100 Grit Dry Use
100mm Diamond Polishing Pad 100 Grit Dry Use
TorkCraft - Dry Use Diamond Polishing Pad Grit: #100 Application: The Tork Craft Dry use diamond polish pads 100mm i..
N$ 263.29
Ex VAT:N$ 228.95
Contact us
Add to Wish List
Quickview
Bow Case 1190x530x210mm With Pre-cubed Breakout Foam Bow Case 1190x530x210mm With Pre-cubed Breakout Foam
Bow Case 1190x530x210mm With Pre-cubed Breakout Foam
Water & Dust Proof Hard Case Tork Craft safety and transport cases withstand the most extreme weather conditions and fluctuating temperatures. Th..
N$ 4,038.80
Ex VAT:N$ 3,512.00
Contact us
Add to Wish List
Quickview
Flap Disc Round Edge A/o 115mm 60 Grit Flat
Flap Disc Round Edge A/o 115mm 60 Grit Flat
Round Edge Flat Flap Disc - Bulk Grit: 60 Diameter: Ø115mm Arbor: Ø22.22mm Max RPM: 13 300 Introducing the Round Edge Flat ..
N$ 54.45
Ex VAT:N$ 47.35
Contact us
Add to Wish List
Quickview
Flap Disc Round Edge A/o 115mm 40 Grit Flat
Flap Disc Round Edge A/o 115mm 40 Grit Flat
Round Edge Flat Flap Disc - Bulk Grit: 40 Diameter: Ø115mm Arbor: Ø22.22mm Max RPM: 13 300 Introducing the Round Edge Flat ..
N$ 54.45
Ex VAT:N$ 47.35
Contact us
Add to Wish List
Quickview
Angle Attachment Au-uni
Angle Attachment Au-uni
Festool Angle attachment AN-UNI Order number: FES205222 Model: AN-UNI ....
N$ 5,444.79
Ex VAT:N$ 4,734.60
Contact us
Add to Wish List
Quickview
Chuck & Key 16mm 1.0-16mm Jt6 Taper
Chuck & Key 16mm 1.0-16mm Jt6 Taper
Drill Chuck with Key Max Chuck Capacity: 16mm Mount size: JT6 Taper A drill chuck with key and a JT6 taper is a tool used to hol..
N$ 351.56
Ex VAT:N$ 305.70
Contact us
Add to Wish List
Quickview
Taper Adapter Mt3 - Jt4
Taper Adapter Mt3 - Jt4
Tork Craft Taper Adapter — MT3 to JT4 (Morse → Jacobs) Adapt machines with an MT3 (Morse Taper #3) spindle or arbor to accept JT4 (Jacobs Tap..
N$ 165.37
Ex VAT:N$ 143.80
Contact us
Add to Wish List
Quickview
Taper Adaptor Mt2 - Jt6 Cmmt Morse Taper
Taper Adaptor Mt2 - Jt6 Cmmt Morse Taper
Tork Craft Taper Adaptor — MT2 → JT6 This is a MT2 male to JT6 male taper adaptor for mounting JT6-type chucks onto machines or arbors with a..
N$ 126.56
Ex VAT:N$ 110.05
Contact us
Add to Wish List
Quickview
Chuck & Key 1.0 - 19.0 Jt4 Taper Mount.
Chuck & Key 1.0 - 19.0 Jt4 Taper Mount.
Tork Craft Chuck & Key — 1.0–19 mm (JT4 Taper Mount) The Tork Craft 19 mm keyed drill chuck offers heavy-duty clamping for industrial and wor..
N$ 670.34
Ex VAT:N$ 582.90
Contact us
Add to Wish List
We Collect Cookies
We use cookies to enhance your experience and analyse traffic. By continuing to browse, you agree to our use of cookies.