4 FLUTE WOOD BORING BIT 14 X 400MM
Click Image for Gallery
4 flute wood boring bit
Diameter: Ø14.0mm
Overall length: 400mm
Shank: 6.35mm hex for quick change
Application:
Use the 4 flute boring bit to drill into wood/timber.
A low rpm rotary drill with a planetary gearbox is required to be used with boring bits. It is possible to use a cordless drill, but in its lowest gear.
Benefits:
- The drill spurs have 4 cutting edges that leaves a cleaner and more precise bored hole.
- Using the same designed screw tip as from an auger drill bit - the 4 flute boring bit feeds itself.
- The shank can be clamped into a 6.35mm quick change chuck or a standard 3 jaw chuck. It also prevents slipping in a chuck.
- The edges of the bit have been hardened and remains sharper for longer.
- The flutes are designed to have excellent chip/shaving clearance.
- 4 cutting edges means faster cutting and more durability.
CAUTION:
Take care when drilling with wood boring bits. Keep the rotary drill steady with
both hands to prevent wrist injury.
| consider safety for your health and the people around you | |||
General safety suggestions:It is advisable to always have the following items nearby and in a good condition
|
|||
 |
 |
 |
 |
|
Wear Gloves
|
Eye Protection
|
Hearing Protection
|
Dust Mask
|